How to Remove and Repair a Rear Door Latch Assembly on Jeep Commander?

Start by removing the watershield before you can take out the rear door latch. After that, take the actuator rod off the exterior handle. After that, remove the actuator rod from the rear door latch and separate it from the interior handle. Afterward, take out the door wire harness connector from the place it joins the rear door latch. Pull out the three bolts connecting the rear door latch to the body and remove the latch and the rods together. Should you need to, remove all actuator rods from the actuator.

How to Install a Door Latch Assembly for the Rear Door on Jeep Commander?

To start installing the latch, make sure any loose rods are reattached to the rear door latch and then secure them with holders. Then, join together both the rear door latch and actuator rods into the door frame, so that the lock knob rod goes through the hole in the inner door panel. Attach the rear door's latch to the door with three bolts tightened to 10.5 Nm (95 in. lbs.). Connect the door wire harness to the rear door latch and attach the actuator rod found on the interior door handle to the rear door latch's holder. Connect the actuator rod to the handle on the back exterior of the door and remember to lower the watershield to the back door before adjusting the rear door latch.

OEM Jeep Commander Door Latch Assembly

Door Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Door Latch Assemblys found

View related parts
Jeep Commander Lock Actuator, Front Driver Side Part Number: 55113369AB
$167.33 MSRP: $251.00
You Save: $83.67 (34%)
ADD TO CART
Product Specifications
- Other Name: Latch - Front Door; Door Latch Assembly, Front Left; Lock Actuator Motor; Lock Actuator.; Latch
- Position: Front Driver Side
- Replaces: 55369091AC, 55369091AD, 55369091AB, 55113369AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Lock Actuator, Rear Part Number: 4589581AL
$393.88 MSRP: $575.00
You Save: $181.12 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Liftgate; Rear Trunk Lock Actuator Motor; Door Lock Actuator; Trunk Latch.; Lock; Latch; Latch Lift Gate
- Position: Rear
- Replaces: 4589581AF, 4589581AI, 4589581AC, 4589581AB, 4589581AE, 4589581AG, 4589581AJ, 4589581AK, 4589581AD, 4589581AH, 4589581AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Jeep Commander | Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Lock Actuator, Front Passenger Side Part Number: 55113374AB
Product Specifications
- Other Name: Latch - Front Door; Door Latch Assembly, Front Right; Lock Actuator Motor; Lock Actuator.; Latch
- Position: Front Passenger Side
- Replaces: 55396530AD, 55396530AC, 55396530AB, 55113374AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Lock Actuator, Rear Passenger Side Part Number: 55113380AB
Product Specifications
- Other Name: Latch - Rear Door; Rear Right Door Latch Assembly; Lock Actuator Motor; Lock Actuator.; Latch
- Position: Rear Passenger Side
- Replaces: 55113380AA, 55396532AB, 55396532AD, 55396532AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Lock Actuator, Rear Driver Side Part Number: 55113381AB
Product Specifications
- Other Name: Latch - Rear Door; Rear Left Door Latch Assembly; Lock Actuator Motor; Lock Actuator.; Latch
- Position: Rear Driver Side
- Replaces: 55396533AD, 55396533AB, 55113381AA, 55396533AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Door Latch Assembly

Choose OEM Door Latch Assembly that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Door Latch Assembly follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Jeep Commander Door Latch Assembly is one of the crucial parts that also define the dependability of a Jeep car. Founded to operate and secure the doors properly, this assembly keeps out the unwanted and safeguards the passengers' possessions. The Jeep Commander ranging from the XK to the 202 Meridian has its operations enhanced by the Door Latch Assembly consisting of features of both automatic and manual lockages. This versatility provides the means of individual or central locking improving the general effectiveness of the Jeep Commander. Sturdiness is a key characteristic of Door Latch Assembly since it endures the everyday wear and tear; however, it can be replaced because of factors such as broken outside handle or a sticking mechanism. Door Latch Assembly plays a significant role in the proper functioning of the Jeep Commander and proper care should therefore be taken to ensure that it functions as expected to enhance the security of the vehicle as well as it functionality. Out of all Jeep Commander Door Latch Assembly in the automotive market, this model is more recommended because it is constructed with heavy and corrosion-resistant materials that would not make it difficult to install. Being applicable to numerous models of the Commander, this assembly at the same time increases safety and improves the process of driving vehicles of this brand, confirming the Jeep brand's adherence to the policies of quality and performance. All in all, the Jeep Commander Door Latch Assembly is quite significant aspect of the car as it forms a complex and meets the expected standards of Jeep company.

Jeep Commander Door Latch Assembly Parts and Q&A

Lock Actuator, Rear
4589581AL
Q: How to Remove and Repair a Rear Door Latch Assembly on Jeep Commander?
A:
Start by removing the watershield before you can take out the rear door latch. After that, take the actuator rod off the exterior handle. After that, remove the actuator rod from the rear door latch and separate it from the interior handle. Afterward, take out the door wire harness connector from the place it joins the rear door latch. Pull out the three bolts connecting the rear door latch to the body and remove the latch and the rods together. Should you need to, remove all actuator rods from the actuator.
Lock Actuator, Rear Driver Side
55113381AB
Q: How to Install a Door Latch Assembly for the Rear Door on Jeep Commander?
A:
To start installing the latch, make sure any loose rods are reattached to the rear door latch and then secure them with holders. Then, join together both the rear door latch and actuator rods into the door frame, so that the lock knob rod goes through the hole in the inner door panel. Attach the rear door's latch to the door with three bolts tightened to 10.5 Nm (95 in. lbs.). Connect the door wire harness to the rear door latch and attach the actuator rod found on the interior Door Handle to the rear door latch's holder. Connect the actuator rod to the handle on the back exterior of the door and remember to lower the watershield to the back door before adjusting the rear door latch.