How to Remove a Door Hinge on Jeep Commander?

The first step is to take off the door and use a grease pencil or something similar to find the positions of the door hinges 2 and 3 on the door. Epoxy washers need to be left with the door hinges; removing them might cause the door to need adjustment. After that, remove the four nuts 4 from the front door hinges and take off the hinges as well. Removing the washers 1 at the front door hinges is needed if the situation requires it.

How to Install a Door Hinge on the Rear Door on Jeep Commander?

After you position the rear door hinge onto the door, be sure that if the epoxy bonded washers come off the hinges, you might need to adjust the door. When you take out the original washers, replace them with epoxy bonded ones (1). Fasten the nuts enough that the hinges won't fall off, then line up the hinges with the reference marks and tighten them to 31 Nm (23 ft.lbs.). Pose the rear door against the body and use a suitable lifting device to keep it in place. Hook the bolts (1 and 4) into place and secure them, position the back door so it fits into the reference marks made while removing it and tighten to 28 Nm (21 ft. lbs.) Process the rear door wire harness and body wire harness and attach the negative battery cable again. Change the position of the rear door as necessary.

OEM Jeep Commander Door Hinge

Interior Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Door Hinges found

View related parts
Jeep Commander Upper Hinge, Front Driver Side Part Number: 55369195AD
$69.07 MSRP: $104.00
You Save: $34.93 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Door; Door Hinge, Front Left Upper, Rear Left Upper; Hinge Door Upper; Door Hinge
- Position: Front Upper Driver Side
- Replaces: 55369195AB, 55369195AC, 55369195AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Upper Hinge, Front Passenger Side Part Number: 55369194AD
$69.07 MSRP: $104.00
You Save: $34.93 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Door; Door Hinge, Front Right Upper, Rear Right Upper; Hinge Door Upper; Door Hinge
- Position: Front Upper Passenger Side
- Replaces: 55369194AC, 55369194AB, 55369194AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Hinge, Rear Part Number: 55396529AB
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge, Rear; Door Hinge; Hinge Liftgate; Liftgate Hinge
- Position: Rear
- Replaces: 55396529AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Lower Hinge, Rear Driver Side Part Number: 55369189AF
Product Specifications
- Other Name: Hinge - Rear Door Lower; Door Hinge, Rear Left Lower; Hinge Rear Door Lower Lower; Hinge Rear Door Lower; Door Hinge
- Position: Rear Lower Driver Side
- Replaces: 55369189AC, 55369189AA, 55369189AD, 55369189AE, 55369189AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Hinge, Rear Driver Side Part Number: 55369023AC
Product Specifications
- Other Name: Hinge - Liftglass; Liftgate Glass Hinge, Rear Left; Hinge Liftglass
- Position: Rear Driver Side
- Replaces: 55369023AA, 55369023AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Hinge, Rear Passenger Side Part Number: 55369022AC
Product Specifications
- Other Name: Hinge - Liftglass; Liftgate Glass Hinge, Rear Right; Hinge Liftglass
- Position: Rear Passenger Side
- Replaces: 55369022AA, 55369022AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Lower Hinge, Front Driver Side Part Number: 55369193AF
Product Specifications
- Other Name: Hinge - Front Door Lower; Door Hinge, Front Left Lower; Hinge Front Door Lower; Door Hinge
- Position: Front Lower Driver Side
- Replaces: 55369187AB, 55369193AB, 55369193AE, 55369187AE, 55369187AA, 55369193AC, 55369187AC, 55369193AD, 55369193AA, 55369187AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Lower Hinge, Rear Passenger Side Part Number: 55369188AF
Product Specifications
- Other Name: Hinge - Rear Door Lower; Door Hinge, Rear Right Lower; Hinge Rear Door Lower Lower; Hinge Rear Door Lower; Door Hinge
- Position: Rear Lower Passenger Side
- Replaces: 55369188AB, 55369188AA, 55369188AD, 55369188AE, 55369188AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Lower Hinge, Front Passenger Side Part Number: 55369192AF
Product Specifications
- Other Name: Hinge - Front Door Lower; Door Hinge, Front Right Lower; Hinge Front Door Lower; Door Hinge
- Position: Front Lower Passenger Side
- Replaces: 55369186AB, 55369192AD, 55369186AE, 55369186AA, 55369192AB, 55369186AD, 55369192AC, 55369192AA, 55369192AE, 55369186AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Door Hinge

Choose OEM Door Hinge that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Door Hinge follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Commander Door Hinge is a very important assembly that has a role of offering support to Jeep Commander cars. Responsible for safely fixing the door to the car body, the Door Hinge makes it easy to open or close the door to allow people to get in or get out of the car. In the course of time various problems appear: the doors sags and get out of alignment, which is quite dangerous and has a negative impact on the functioning of the facility. Jeep Commander Door Hinges are made of strong steel and many of them come with a coating that makes them resistant to corrosion which makes them highly durable. Suitable for the different Jeep Commander versions also for the new XK and the 2022 Meridian these hinges are designed to bring back the required adjustment as well as the functionality or replace worn out or damaged parts such as for instance the hardened steel pins or the brass bushings. For instance, contemporary Jeep Commander Door Hinges consist of components such as door check straps that limit the extent to which doors can open during use, thus boosting safety. For the Jeep Commander, a car that prides itself in having the third row of seats as well as impressive brawn, the Door Hinges play a critical role of not only making a drive productive, but also safe. Being well-know for their quality and reliability Jeep Commander Door Hinges can be graded as unique in the automotive market, therefore any Jeep Commander owner striving to preserve the car's integrity and safety should consider them as an essential purchase.

Jeep Commander Door Hinge Parts and Q&A

Upper Hinge, Front Driver Side
55369195AD
Q: How to Remove a Door Hinge on Jeep Commander?
A:
The first step is to take off the door and use a grease pencil or something similar to find the positions of the door hinges 2 and 3 on the door. Epoxy washers need to be left with the door hinges; removing them might cause the door to need adjustment. After that, remove the four nuts 4 from the front door hinges and take off the hinges as well. Removing the washers 1 at the front door hinges is needed if the situation requires it.
Lower Hinge, Rear Driver Side
55369189AF
Q: How to Install a Door Hinge on the Rear Door on Jeep Commander?
A:
After you position the rear door hinge onto the door, be sure that if the epoxy bonded washers come off the hinges, you might need to adjust the door. When you take out the original washers, replace them with epoxy bonded ones (1). Fasten the nuts enough that the hinges won't fall off, then line up the hinges with the reference marks and tighten them to 31 Nm (23 ft.lbs.). Pose the rear door against the body and use a suitable lifting device to keep it in place. Hook the bolts (1 and 4) into place and secure them, position the back door so it fits into the reference marks made while removing it and tighten to 28 Nm (21 ft. lbs.) Process the rear door wire harness and body wire harness and attach the negative Battery Cable again. Change the position of the rear door as necessary.