How to Properly Install and Adjust a Front Wiper Arm on Jeep Commander?

You should park the wiper motor in a certain position before attaching the front wiper arms. Do not move the ignition switch until the wiper pivots have stopped. Place the front wiper arms against the pivot shafts, while the motor is in its park position. Lin up the lower edge of the wiper blade with the horizontal T marks you see in the upper margin of the lower windshield blackout zone. Slacken the wiper arm a bit and press the pivot end down hard over the pivot shaft. After installing the wiper arm on the pivot, tighten the nut that secures them to 21 Nm (16 ft. lbs.). Moisten the windshield, turn on the front wipers and when they're finished, turn the switch to OFF and make sure that the wiper arms are in the proper position. Don't forget to replace the plastic cap over the wiper arm pivot nut.

How to Maintain the Front Wiper Arm on Jeep Commander?

First lift the front wiper arm to its over-center position so the blade goes off the windshield and the spring tension reduced on the pivot shaft connection. Use a tool to lift the plastic nut cap from the wiper arm at the pivot end, then remove the nut keeping the wiper arm fixed. Don't use a wiper arm terminal puller when taking off the front wiper arm because it could be damaging. Rock the wiper slightly from side to side to release the attachment between the front wiper arm pivot end and the pivot shaft and take out the wiper arm.

OEM Jeep Commander Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Arms found

View related parts
Jeep Commander Wiper Arm, Rear Part Number: 5174877AA
$51.14 MSRP: $104.00
You Save: $52.86 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wiper Arm - Rear Wiper; Back Glass Wiper Arm; Rear Arm; Arm Liftgate Wiper; Arm Rear Wiper
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Wiper Arm, Front Driver Side Part Number: 5179183AA
Product Specifications
- Other Name: Arm Left - Front Wiper; Windshield Wiper Arm, Left; Front Arm; Arm Front Wiper; Arm Wiper
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Wiper Arm, Front Part Number: 5179182AA
Product Specifications
- Other Name: Arm Left - Front Wiper; Windshield Wiper Arm, Right; Front Arm; Arm Front Wiper; Arm Wiper
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Wiper Arm

Choose OEM Wiper Arm that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Wiper Arm follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Jeep Commander Wiper Arm is one of the parts of the Jeep which shows the reliability and the performance models of Jeep. A device fixed on the windshield, cars which is responsible for linking the wiper blades to the motor to guarantee the visibility of the road by wiping off the haze, rainfall or something similar to it from the windshield. This functionality is very important for the safety of the driver and the passengers specifically in cases of blizzard. Jeep Commander Wiper Arm fits different Commander models, such as the XK and the 2022 Meridian; it is part of the wiper link assembly converting the rotational energy of the motor into a sweeping movement. This smooth functioning increases the efficacy of the vehicle's windshield wiper system, which in turn, sums up the sturdiness and reliability attribute of Jeep Commander. The Jeep Commander Wiper Arm can be noted as a unique car spare part in the market because of its construction and design that is built to favor different driving zones. In the same regard, the Wiper Arm's function of keeping the glass clear of filth greatly enhances road safety and allows difficult conditions to be driven through without a problem. Altogether, the Jeep Commander Wiper Arm is a valuable part with regard to driving, thus being one of the key components that add value to the car and the driving experience in general.

Jeep Commander Wiper Arm Parts and Q&A

Wiper Arm, Front
5179182AA
Q: How to Properly Install and Adjust a Front Wiper Arm on Jeep Commander?
A:
You should park the Wiper Motor in a certain position before attaching the front wiper arms. Do not move the ignition switch until the Wiper Pivots have stopped. Place the front wiper arms against the pivot shafts, while the motor is in its park position. Lin up the lower edge of the wiper blade with the horizontal T marks you see in the upper margin of the lower Windshield blackout zone. Slacken the wiper arm a bit and press the pivot end down hard over the pivot shaft. After installing the wiper arm on the pivot, tighten the nut that secures them to 21 Nm (16 ft. lbs.). Moisten the windshield, turn on the front wipers and when they're finished, turn the switch to OFF and make sure that the wiper arms are in the proper position. Don't forget to replace the plastic cap over the wiper arm pivot nut.
Wiper Arm, Front Driver Side
5179183AA
Q: How to Maintain the Front Wiper Arm on Jeep Commander?
A:
First lift the front wiper arm to its over-center position so the blade goes off the windshield and the spring tension reduced on the pivot shaft connection. Use a tool to lift the plastic nut cap from the wiper arm at the pivot end, then remove the nut keeping the wiper arm fixed. Don't use a wiper arm terminal puller when taking off the front wiper arm because it could be damaging. Rock the wiper slightly from side to side to release the attachment between the front wiper arm pivot end and the pivot shaft and take out the wiper arm.