Choose OEM Brake Controller that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Brake Controller follows strict manufacturing steps to lock in quality and fit. If your Jeep Grand Cherokee matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Grand Cherokee parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.
The Brake Controller of the Jeep Grand Cherokee delivers proportional power to the trailer brakes, which makes stops feel confident and short even with heavy towing. Moreover, it is compatible with Jeep factory tow wiring. The Brake Controller detects brake pedal pressure and the rate at which the vehicle is slowing down to provide a carefully measured amount of electrical current to the trailer's electromagnets. This allows the driver to fine-tune gain to changing conditions and loads. The digital display clearly shows voltage and boost adjustments to deliver precise control on every trip. The Grand Cherokee isn't just about its towing technology. The rugged unibody construction of the Jeep, smooth-pulling V8 engines and the renowned Quadra-Drive system, which shuffles torque to the wheel with grip, gives Jeep fans trail capability that rivals dedicated off-road rig, but with quiet comfort on pavement. The roomy seating, elegant interior with touchscreen connectivity, and high safety ratings make the Grand Cherokee a great daily driver. Genuine OEM parts will help your Jeep maintain durability, value, and performance over the years. Stopping power is raised when the Brake Controller helps share the forces, giving you more confidence in a tow on the later editions of the Grand Cherokee with transfer cases to get you going when you're in snow or mud. To install, the operator must mount the Brake Controller under the dash within reach. The operator must then run the harness to the factory tow wiring. The operator must also connect the power, ground, and stoplight signal. The operator must then secure all the leads and road test and adjust the sensitivity.