How to Maintain and Fix a Wheel Hub on Jeep Grand Cherokee?

Start by raising and holding up the vehicle, then remove the wheel and tire assembly with the caliper supported so the hose doesn't hang. Then, take the disc brake caliper out and afterward remove the brake caliper adapter. Throw away the O-ring and remove the disc brake rotor. Now, remove the nut on the wheel speed sensor and then take out the sensor. Pull out the three bolts from the back of the steering knuckle and take the hub bearing off the wheel hub. Remove the hub bearing from the knockoff place it on the knuckle and use the three bolts to secure it. Ensure that you tighten the bolts to 85 ft. lbs/115 Nm. After fitting the hub, replace the wheel speed sensor and its nut, then the brake rotor, brake caliper adapter and caliper. Now, attach the wheel and tire again, lower the support and have the vehicle lowered into position.

How to Service a Wheel Hub and Bearing on Jeep Grand Cherokee?

Raise and support the vehicle on a frame stand and then eliminate the wheel and tire before working on the front hub and bearing. Then, remove the brake caliper, caliper anchor, rotor and ABS wheel speed sensor. Carefully remove the cotter pin, nut retainer and axle hub nut, then come to the back of the steering knuckle to remove the hub bearing mounting bolts. Take away the hub bearing from the steering knuckle and also off the axle shaft. Install the hub by adding the bearing onto the knuckle and then use the hub bearing to knuckle bolts to secure. Tighten them to a level of 102 Nm (75 ft. lbs.). Afterwards, put in the hub washer and hub nut, turning the nut to 237 Nm (175 ft. lbs.), then replace the nut retainer and insert a fresh cotter pin. After finishing, mount the brake rotor, caliper anchor, caliper and ABS wheel speed sensor again, then place the wheel and tire back on, lift the car and remove the support.

OEM Jeep Grand Cherokee Wheel Hub

Wheel Axle Hub

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Wheel Hubs found

View related parts
Jeep Grand Cherokee Wheel Bearings, Front Part Number: 53007449AB
$252.45 MSRP: $520.00
You Save: $267.55 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing - Brake; Front Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit; Axle Bearing.; Hub & Bearing; Front Hub & Bearing Assembly; Wheel Bearing and Hub Assembly.
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1998 Jeep Grand Cherokee | 5.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Jeep Grand Cherokee Hub Assembly, Front Part Number: 52098679AD
$246.42 MSRP: $375.00
You Save: $128.58 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub - Brake; Front Wheel Hub Assembly; Wheel Bearing; Hub Repair Kit; Axle Bearing; Front Hub & Bearing; Hub And Bearing Brake; Wheel Hub
- Position: Front
- Replaces: 52098679AC, 52098679AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2004 Jeep Grand Cherokee | Laredo, Limited, Overland, Special Edition, Sport | 4.0L L6, 4.7L V8, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, EKY
View related parts
Jeep Grand Cherokee Wheel Bearing, Rear Part Number: 52124768AB
$181.28 MSRP: $267.00
You Save: $85.72 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Wheel; Wheel Bearing, Rear; Axle Bearing; Rear Wheel Bearing; Bearing; Bearing Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2021 Jeep Grand Cherokee | 75th Anniversary, 80th Anniversary, Altitude, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, Overland Summit, SRT, SRT8, Summit, Trackhawk, Trailhawk, Upland | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Grand Cherokee Hub Assembly, Front Part Number: 52124767AE
$191.63 MSRP: $294.00
You Save: $102.37 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing - Brake; Front Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit; Axle Bearing.; Front Hub & Bearing; Hub And Bearing Brake Front; Wheel Bearing and Hub Assembly; Wheel Bearing
- Position: Front
- Replaces: 52124767AB, 52124767AC, 52124767AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2022 Jeep Grand Cherokee | 4xe, 75th Anniversary, 80th Anniversary, Altitude, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, Overland Summit, SRT, SRT8, Summit, Summit Reserve, Trackhawk, Trailhawk, Upland | 3.0L V6, 3.6L V6, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L FLEX, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Grand Cherokee Hub Assembly, Front Part Number: 52089434AE
$326.30 MSRP: $480.00
You Save: $153.70 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing - Brake; Front Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit; Axle Bearing.; Front Hub & Bearing; Hub And Bearing Brake Front; Wheel Bearing and Hub Assembly; Wheel Bearing
- Position: Front
- Replaces: 52089434AB, 52089434AD, 52089434AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Jeep Grand Cherokee | 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Jeep Grand Cherokee Hub & Bearing, Rear Part Number: 68346852AA
$160.56 MSRP: $245.00
You Save: $84.44 (35%)
ADD TO CART
Product Specifications
- Other Name: Hub Bearing - Brake; Wheel Bearing and Hub Assembly, Rear; Wheel Hub Repair Kit; Wheel Bearing; Wheel Hub; Rear Hub & Bearing
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, Altitude, Altitude X, Anniversary Edition 4xe, Laredo, Laredo X, Limited, Overland, Summit, Summit Reserve, Trailhawk | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Hub & Bearing, Rear Part Number: 52111884AB
$329.29 MSRP: $497.00
You Save: $167.71 (34%)
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing - Wheel; Rear Wheel Bearing and Hub Assembly; Repair Kit; Assembly; Bearing Kit.; Hub And Bearing Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing
- Position: Rear
- Replaces: 52111884AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Jeep Grand Cherokee | 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Jeep Grand Cherokee Hub Assembly, Front Part Number: 68349631AA
$212.97 MSRP: $319.00
You Save: $106.03 (34%)
ADD TO CART
Product Specifications
- Other Name: Hub - Brake; Wheel Bearing and Hub Assembly, Front; Wheel Hub Repair Kit; Wheel Bearing; Axle Bearing; Wheel Hub; Front Hub & Bearing
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, Altitude, Altitude X, Anniversary Edition 4xe, Laredo, Laredo X, Limited, Overland, Summit, Summit Reserve, Trailhawk | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Rear Hub Part Number: 4779612AE
$258.32 MSRP: $380.00
You Save: $121.68 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub - Wheel; Wheel Hub, Rear; Wheel Hub Repair Kit; Hub; Hub Wheel; Wheel Hub
- Position: Rear
- Replaces: 4779612AB, 4779612AC, 4779612AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2022 Jeep Grand Cherokee | 4xe, 75th Anniversary, 80th Anniversary, Altitude, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, Overland Summit, SRT, SRT8, Summit, Summit Reserve, Trackhawk, Trailhawk, Upland | 3.0L V6, 3.6L V6, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L FLEX, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

Jeep Grand Cherokee Wheel Hub

Choose OEM Wheel Hub that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Wheel Hub follows strict manufacturing steps to lock in quality and fit. If your Jeep Grand Cherokee matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Grand Cherokee parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Wheel Hub of Jeep Grand Cherokee automobiles play an important role of transferring the steering control and stability of the car to the wheels. It contains crucial parts that include the bearings, sensors and the brake components that are geared towards ensuring that the wheels rotate as they are fixed to the vehicles by adhering to the vehicle structure. From the models of Jeep Grand Cherokee, Wheel Hubs of different bolt patterns and extending axles widths have been used through the years. Choosing the right Wheel Hub for replacement means that one has to look for a unit that offers a direct fit on the Jeep Grand Cherokee tomeet specific demands of the car. The cost will depend upon the exact year model and the part but there is always the availability of OE-grade that makes it possible to restore the Wheel Hub of the Jeep Grand Cherokee without having to break the bank.

Jeep Grand Cherokee Wheel Hub Parts and Q&A

Hub Assembly, Front
52089434AE
Q: How to Maintain and Fix a Wheel Hub on Jeep Grand Cherokee?
A:
Start by raising and holding up the vehicle, then remove the wheel and tire assembly with the caliper supported so the hose doesn't hang. Then, take the disc Brake Caliper out and afterward remove the brake caliper adapter. Throw away the O-ring and remove the disc brake rotor. Now, remove the nut on the wheel speed sensor and then take out the sensor. Pull out the three bolts from the back of the Steering Knuckle and take the hub bearing off the wheel hub. Remove the hub bearing from the knockoff place it on the knuckle and use the three bolts to secure it. Ensure that you tighten the bolts to 85 ft. lbs/115 Nm. After fitting the hub, replace the wheel speed sensor and its nut, then the brake rotor, brake caliper adapter and caliper. Now, attach the wheel and tire again, lower the support and have the vehicle lowered into position.
Hub Assembly, Front
52098679AD
Q: How to Service a Wheel Hub and Bearing on Jeep Grand Cherokee?
A:
Raise and support the vehicle on a frame stand and then eliminate the wheel and tire before working on the front hub and bearing. Then, remove the Brake Caliper, caliper anchor, rotor and ABS wheel speed sensor. Carefully remove the cotter pin, nut retainer and axle hub nut, then come to the back of the Steering Knuckle to remove the hub bearing mounting bolts. Take away the hub bearing from the steering knuckle and also off the Axle Shaft. Install the hub by adding the bearing onto the knuckle and then use the hub bearing to knuckle bolts to secure. Tighten them to a level of 102 Nm (75 ft. lbs.). Afterwards, put in the hub washer and hub nut, turning the nut to 237 Nm (175 ft. lbs.), then replace the nut retainer and insert a fresh cotter pin. After finishing, mount the brake rotor, caliper anchor, caliper and ABS wheel speed sensor again, then place the wheel and tire back on, lift the car and remove the support.