How to Replace a Damaged Fan Blade in a Cooling Fan Assembly for the 3.7L Heavy Duty/Max Cool/Trailer Tow Package on Jeep Liberty?

If the blade is bent, warped, cracked or damaged, the motor should be replaced, as the blades can't be repaired. Together, you must take out the viscous fan and the shroud for the 3.7L Heavy Duty/Max Cool/Trailer Tow cooling package. Add the cooling fan to the shroud and then tighten the fan shroud to radiator bolts to 9 Nm (80 in. lbs.). Subsequently, place the fan shroud assembly into the car and connect it to the radiator supports with 9 Nm (80 in. lbs.) of torque. Connect the wire of the fan motor to the harness connector and then fasten it to the shroud. First attach the radiator hose retainer to the electric fan shroud and then put in the transmission cooling line retainer bolt. After that, fit the combination bottle for both coolant recovery and squirting washer fluid. Then, connect the battery's negative lead, turn the engine on and observe whether the fan is working.

How to Service a Cooling Fan Assembly on Jeep Liberty?

You should begin by pulling out the battery negative terminal to service the electric radiator fan. Also, remove the bottle for mixture of coolant and washer fluid. Loosen and remove the retainer near the radiator hose from the electric fan shroud and take out the transmission cooling line retainer bolt from the electric fan shroud. First, unhook the electric fan connector from the shroud and remove the two bolts. Once that's done, lift the shroud from the car. After that, take the cooling fan out of the shroud. Should the fan blade appear warped, bent, cracked or damaged in any way, it must be replaced and a repair is not allowed. In vehicles fitted with the 3.7L Heavy Duty/Max Cool/Trailer Tow cooling package, you must remove the viscous fan and its shroud together since they are connected.

OEM Jeep Liberty Cooling Fan Assembly

Engine Cooling Fan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Cooling Fan Assemblys found

View related parts
Jeep Liberty Fan Blade Part Number: 55038108AA
$82.14 MSRP: $122.00
You Save: $39.86 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan - Cooling; Engine Cooling Fan Clutch Blade; Radiator Fan Assembly; Fan Cooling
- Replaces: 55116884AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Jeep Liberty | Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Fan Blade Part Number: 52079654AE
$138.13 MSRP: $206.00
You Save: $67.87 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan - Cooling; Engine Cooling Fan Clutch Blade; Radiator Fan Assembly; Fan Cooling Mechanical
- Replaces: 52079654AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2007 Jeep Liberty | 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Fan Blade Part Number: 52079727AA
$69.94 MSRP: $88.67
You Save: $18.73 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan - Cooling; Radiator Fan Assembly; Fan; Fan Cooling
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Jeep Liberty | Limited, Sport | 4 Cyl 2.8 L DIESEL
View related parts
Jeep Liberty Fan Assembly Part Number: 5143021AA
Product Specifications
- Other Name: Fan - Cooling; Radiator Fan Assembly; Fan Blade; Fan Cooling Electric; Fan Cooling
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Jeep Liberty | Limited, Sport | 4 Cyl 2.8 L DIESEL
View related parts
Jeep Liberty Fan Assembly Part Number: 68033228AA
Product Specifications
- Other Name: Module - Fan; Dual Radiator and Condenser Assembly; Engine Cooling Fan; Radiator Fan; Fan Blade; Fan Module; Module Fan
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Jeep Liberty | Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Fan Assembly Part Number: 52079528AB
$305.91 MSRP: $451.00
You Save: $145.09 (33%)
Product Specifications
- Other Name: Fan - Cooling; Engine Cooling Fan Assembly; Dual Radiator and Condenser Fan Assembly; Radiator Fan Assembly; Fan Blade; Fan Module; Fan Cooling Electric; Fan Cooling; Cooling Fan Assembly
- Replaces: 5183565AA, 52079528AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Jeep Liberty | 3.7L V6
- 2004 Jeep Liberty | Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Fan & Motor Part Number: 55037691AA
Product Specifications
- Other Name: Fan - Cooling; Engine Cooling Fan Assembly; Dual Radiator Fan Assembly; Fan Blade; Motor; Fan Assembly; Fan Cooling Elbow; Ectric; Fan Cooling Electric; Fan Cooling; Cooling Fan Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Jeep Liberty | 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Fan Assembly Part Number: 5183563AA
Product Specifications
- Other Name: Fan - Radiator Cooling; Engine Cooling Fan Assembly; Dual Radiator and Condenser Fan.; Fan Module Radiator Cooling; Cooling Fan Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Jeep Liberty | Limited, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Fan & Motor Part Number: 55037692AB
Product Specifications
- Other Name: Fan - Cooling; Engine Cooling Fan Assembly; Dual Radiator Fan Assembly; Fan Blade; Motor; Fan Assembly; Fan Cooling Electric; Shroud Fan; Cooling Fan Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Jeep Liberty | Sport | 4 Cyl 2.4 L GAS
View related parts
Jeep Liberty Fan & Motor Part Number: 55037659AB
Product Specifications
- Other Name: Fan - Radiator Cooling; Engine Cooling Fan Assembly; Dual Radiator and Condenser Fan.; Fan Assembly
- Replaces: 55037659AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2004 Jeep Liberty | Limited, Renegade, Sport | 2.4L L4, 4 Cyl 2.4 L GAS, 6 Cyl 3.7 L GAS

Jeep Liberty Cooling Fan Assembly

Choose OEM Cooling Fan Assembly that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Cooling Fan Assembly follows strict manufacturing steps to lock in quality and fit. If your Jeep Liberty matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Liberty parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Jeep Liberty Cooling Fan Assembly stands as a crucial reliable device which acts as a key element for regulating engine temperatures within different Jeep Liberty models. The assembly containing fan blade and mounting shroud with motor sits close to the radiator to manage airflow for efficient coolant cooling before the engine entry. The Jeep Liberty Cooling Fan Assembly works as an electric or mechanical version to maintain superior cooler operation at driving stops and low speeds which stops engine overheating and boosts engine performance. Thanks to its exceptional performance the electric variant functions efficiently as it automatically adjusts to different driving situations. This cooling device represents a vital component because it supports all Jeep Liberty vehicles produced between 2002 and 2012 during the KJ and KK product phases. This cooling fan assembly improves Jeep Liberty vehicle performance while safeguarding safety through its ability to reduce engine breakdowns. The strong construction elements along with the advanced performance capabilities of this feature produce a standout element which enables Jeep Liberty drivers to remain confident about using their vehicles for all their transportation needs. The car Cooling Fan Assembly continues to demonstrate quality and performance excellence which proves its essential status for all the automaker model vehicle owners.

Jeep Liberty Cooling Fan Assembly Parts and Q&A

Fan Assembly
68033228AA
Q: How to Replace a Damaged Fan Blade in a Cooling Fan Assembly for the 3.7L Heavy Duty/Max Cool/Trailer Tow Package on Jeep Liberty?
A:
If the blade is bent, warped, cracked or damaged, the motor should be replaced, as the blades can't be repaired. Together, you must take out the viscous fan and the shroud for the 3.7L Heavy Duty/Max Cool/Trailer Tow cooling package. Add the cooling fan to the shroud and then tighten the fan shroud to Radiator bolts to 9 Nm (80 in. lbs.). Subsequently, place the fan shroud assembly into the car and connect it to the radiator supports with 9 Nm (80 in. lbs.) of torque. Connect the wire of the fan motor to the harness connector and then fasten it to the shroud. First attach the radiator hose retainer to the electric fan shroud and then put in the transmission cooling line retainer bolt. After that, fit the combination bottle for both coolant recovery and squirting washer fluid. Then, connect the battery's negative lead, turn the engine on and observe whether the fan is working.
Fan Blade
55038108AA
Q: How to Service a Cooling Fan Assembly on Jeep Liberty?
A:
You should begin by pulling out the battery negative terminal to service the electric radiator fan. Also, remove the bottle for mixture of coolant and washer fluid. Loosen and remove the retainer near the radiator hose from the electric fan shroud and take out the transmission cooling line retainer bolt from the electric fan shroud. First, unhook the electric fan connector from the shroud and remove the two bolts. Once that's done, lift the shroud from the car. After that, take the cooling fan out of the shroud. Should the fan blade appear warped, bent, cracked or damaged in any way, it must be replaced and a repair is not allowed. In vehicles fitted with the 3.7L Heavy Duty/Max Cool/Trailer Tow cooling package, you must remove the viscous fan and its shroud together since they are connected.