How to Remove the Shift Indicator for Automatic Transmission on Jeep Liberty?

To make the Transmission Mode Indicator go away on vehicles with an automatic transmission, first unhook and isolate the battery's negative cable. After that, remove the center floor console located above the gear lever and its encasing. Grip the left lower socket at the bezel housing and rotate it backwards about 30 degrees, then bring it and the bulb out straight from the keyhole formed in the housing. In the end, remove the base of the bulb before you replace it.

How to Install the Shift Indicator for Automatic Transmission on Jeep Liberty?

Before putting in the Transmission Mode Indicator for a vehicle with automatic transmission, confirm the bulb you use is not too powerful and would prevent damage. Target the most durable base of the bulb with the center of the gear selector bulb socket. Place the bulb right into the light socket until it clicks into place. Then, line the socket and the bulb with the keyed opening along the left lower edge of the housing and push them into the housing until the socket is completely seated. Turn the socket clockwise a little under one-third of the way to lock it down. After that, secure the center floor console over the gear selector lever and its bezel and reconnect the battery negative cable.

OEM Jeep Liberty Shift Indicator

Shifter Indicator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Shift Indicators found

View related parts
Jeep Liberty Shift Indicator Part Number: 52125340AD
$198.77 MSRP: $299.00
You Save: $100.23 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shifter - Floor Shifter; Automatic Transmission Shift Indicator; Bezel Floor Shifter
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012 Jeep Liberty | Jet, Limited, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Bezel, Beige, Center Part Number: 1CK02DKAAD
$14.28 MSRP: $95.15
You Save: $80.87 (85%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bezel - Gear Shift Indicator; Console Trim Panel, Center; Bezel Gear Shift Indicator
- Position: Center
- Replaces: 1CK02DKAAC, 1CK02DKAAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Jeep Liberty | Limited, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Bezel, Beige, Center Part Number: 1BT61DKAAC
$37.87 MSRP: $240.00
You Save: $202.13 (85%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bezel - Console PRNDL; Console Trim Panel, Center; Bezel Console PRNDL
- Position: Center
- Replaces: 1BT61DKAAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011 Jeep Liberty
- 2008 Jeep Liberty | 3.7L V6
View related parts
Jeep Liberty Bezel, Gray, Center Part Number: 1BT61XDVAC
$156.47 MSRP: $344.00
You Save: $187.53 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bezel - Console PRNDL; Console Trim Panel, Center; Bezel Console PRNDL
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Jeep Liberty | Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Bezel, Center Part Number: 1CK01XZAAC
Product Specifications
- Other Name: Bezel - Console PRNDL; Console Trim Panel, Center; Bezel Console PRNDL
- Position: Center
- Replaces: 1CK01XZAAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011 Jeep Liberty | Limited | 6 Cyl 3.7 L GAS
- 2009 Jeep Liberty | 3.7L V6
View related parts
Jeep Liberty Shift Indicator Part Number: 52125340AC
Product Specifications
- Other Name: Shifter - Floor Shifter; Automatic Transmission Shift Indicator; Bezel Floor Shifter
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2011 Jeep Liberty | Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Bezel, Beige, Center Part Number: 1JP61DKAAB
Product Specifications
- Other Name: Bezel - Gear Shift Indicator; Console Trim Panel, Center; Bezel Gear Shift Indicator
- Position: Center
- Replaces: 1JP61DKAAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2011 Jeep Liberty | Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Bezel, Gray, Center Part Number: 1JP61XDVAB
Product Specifications
- Other Name: Bezel - Gear Shift Indicator; Console Trim Panel, Center; Bezel Gear Shift Indicator
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Jeep Liberty | Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Bezel, Center Part Number: 1TK341AAAA
Product Specifications
- Other Name: Bezel - Console PRNDL; Console Trim Panel, Center; Bezel Console PRNDL
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012 Jeep Liberty | Jet, Limited, Sport | 6 Cyl 3.7 L GAS

Jeep Liberty Shift Indicator

Choose OEM Shift Indicator that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Shift Indicator follows strict manufacturing steps to lock in quality and fit. If your Jeep Liberty matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Liberty parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

A key device for Jeep Liberty navigation is the Shift Indicator which improves driving performance through direct gear selection display to boost operational efficiency and safety. Production began in 2002 on both KJ and KK Jeep Liberty generations which integrated a Shift Indicator that the manufacturer placed on the dashboard or close to the gear selector. Modern Jeep Liberties show the engaged gear to users while offering digital displays and fuel efficiency recommendations alongside this feature. The Jeep Liberty Shift Indicator functions across various model years because the brand emphasizes product reliability and performance quality. Being sturdy with a friendly user interface the Shift Indicator proves its exceptional position within automotive markets to enable drivers reach better decisions during road travels. This functionality enhances overall driving performance because it belongs to the versatile Jeep Liberty which maintains its compact SUV exterior and design. As an advanced feature in manufacturer Liberty the Shift Indicator enhances driving performance while prioritizing safety for the brand model vehicles which solidifies it as a trusted system for the automaker enthusiasts.

Jeep Liberty Shift Indicator Parts and Q&A

Bezel, Beige, Center
1CK02DKAAD
Q: How to Remove the Shift Indicator for Automatic Transmission on Jeep Liberty?
A:
To make the Transmission Mode Indicator go away on vehicles with an automatic transmission, first unhook and isolate the battery's negative cable. After that, remove the center floor console located above the gear lever and its encasing. Grip the left lower socket at the bezel housing and rotate it backwards about 30 degrees, then bring it and the bulb out straight from the keyhole formed in the housing. In the end, remove the base of the bulb before you replace it.
Bezel, Beige, Center
1BT61DKAAC
Q: How to Install the Shift Indicator for Automatic Transmission on Jeep Liberty?
A:
Before putting in the Transmission Mode Indicator for a vehicle with automatic transmission, confirm the bulb you use is not too powerful and would prevent damage. Target the most durable base of the bulb with the center of the gear selector bulb socket. Place the bulb right into the light socket until it clicks into place. Then, line the socket and the bulb with the keyed opening along the left lower edge of the housing and push them into the housing until the socket is completely seated. Turn the socket clockwise a little under one-third of the way to lock it down. After that, secure the center floor console over the gear selector lever and its bezel and reconnect the battery negative cable.