How is the Hood Latch Installed on Jeep Liberty?

Put the hood latch into position according to how it was removed, then put bolts 1 in and tighten them to 13.5 Nm (10 ft. lbs.). Hold the rope 4 away from the boat, then attach the latch release cable 2 to the latch.

How to Service and Repair a Hood Latch on Jeep Liberty?

Removing the three bolts from the upper section of the grille opening reinforcement allows you to proceed with service and repair of the hood latch. Carefully bring the grille opening reinforcement forward to get at the nuts and remove them and then pull the latch apart. Remove the release cable and take out the latch. Direct the latch cable through the hole in the support bracket, link the release cable and mount the latch to the support bracket for its installation. Apply both nuts on the latch and make sure they are tightened to 14 N.m. Put the grille opening reinforcement on it again and prick in the three upper T25 bolts, resisting them to 10 N.m.

OEM Jeep Liberty Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hood Latches found

View related parts
Jeep Liberty Lock, Front Part Number: 4589826AA
$81.34 MSRP: $123.00
You Save: $41.66 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Hood; Hood Latch, Front; Latch; Latch Hood; Hood Latch
- Position: Front
- Replaces: 4589484AB, 55157370AC, 4589484AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Jeep Liberty | Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Lock, Front Part Number: 55176926AC
Product Specifications
- Other Name: Latch - Hood; Hood Latch, Front; Latch; Latch Hood; Hood Latch
- Position: Front
- Replaces: 55176926AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2007 Jeep Liberty | 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

Jeep Liberty Hood Latch

Choose OEM Hood Latch that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Hood Latch follows strict manufacturing steps to lock in quality and fit. If your Jeep Liberty matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Liberty parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Hood Latch is an important component of Jeep Liberty automobiles which holds the hood tightly so that it does not open while the vehicle is in use. This component is located right under the front of the hood and that ensures that some of the most sensitive parts of the car such as the engine, the radiator, and the battery are well sheltered. Different Hood Latch types may have been used in the Jeep Liberty models in the course of the years, although those are not expounded. The primary mechanism stays of similar as it is to ensure reliability and safety of the hood in order to remain closed during driving. The Hood Latch of Jeep Liberty plays an important role of preserving the Company's vehicle parts and guaranteeing a safe road trip.

Jeep Liberty Hood Latch Parts and Q&A

Lock, Front
4589826AA
Q: How is the Hood Latch Installed on Jeep Liberty?
A:
Put the hood latch into position according to how it was removed, then put bolts 1 in and tighten them to 13.5 Nm (10 ft. lbs.). Hold the rope 4 away from the boat, then attach the latch release cable 2 to the latch.
Lock, Front
55176926AC
Q: How to Service and Repair a Hood Latch on Jeep Liberty?
A:
Removing the three bolts from the upper section of the grille opening reinforcement allows you to proceed with service and repair of the hood latch. Carefully bring the grille opening reinforcement forward to get at the nuts and remove them and then pull the latch apart. Remove the release cable and take out the latch. Direct the latch cable through the hole in the support bracket, link the release cable and mount the latch to the support bracket for its installation. Apply both nuts on the latch and make sure they are tightened to 14 N.m. Put the grille opening reinforcement on it again and prick in the three upper T25 bolts, resisting them to 10 N.m.