How Does Wheelhouse Installation Affect the Front Fender Liner on Jeep Liberty?

The first step is to put the front wheel house liner in the opening in the front wheel house. After that, fasten the wheel speed sensor harness onto the underside of the wheel house liner. Insert three push pins into each hole in the wheel house liner and fender inner wheelhouse. Once done, repeat with three push pins into each hole in the wheel house liner and front fascia. Secure the splash shield to the sill molding with a rivet, followed by installing all the left over push pins. Rivet a rivet into the wheel house liner and the front fascia hole and attach four other rivets to the molding of the front fender flare, the wheel house liner and to the fender. Reattach the wheel and the tire, then tighten the wheel nuts at 136 Nm (100 ft. lbs.).

How Does Wheelhouse Handle Front Fender Liner Service and Repair on Jeep Liberty?

You should lift and support your vehicle before working on or repairing the fender liner. With the wheel and tire taken off, then you can access the front wheel house liner. Set aside four rivets from the front fender flare molding and remove the rivet holding the wheel-house liner to the undertray. Remove every push pin in the wheel house liner, separate the wheel speed sensor harness from it and then remove the front wheel house liner from the front wheel house opening.

OEM Jeep Liberty Wheelhouse

Outer Wheelhouse

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Wheelhouses found

View related parts
Jeep Liberty Fender Liner, Front Part Number: 55156790AD
$23.15 MSRP: $34.20
You Save: $11.05 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Front Fender; Fender Splash Shield; Liner Front Fender
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Jeep Liberty | 65th Anniversary Edition, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Wheelhouse Liner, Rear Passenger Side Part Number: 55157412AB
$63.05 MSRP: $92.80
You Save: $29.75 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Fender Side; Quarter Panel Splash Shield, Rear Right; Liner Fender Side
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Jeep Liberty | Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Wheelhouse Liner, Rear Driver Side Part Number: 55360147AD
$78.63 MSRP: $117.00
You Save: $38.37 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Fender Side; Quarter Panel Splash Shield, Rear Left; Fender Splash Shield; Liner Fender Side
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2007 Jeep Liberty | 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Fender Liner, Front Driver Side Part Number: 55156791AD
$89.90 MSRP: $133.00
You Save: $43.10 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Front Fender; Fender Splash Shield, Front Left; Liner Front Fender; Fender Splash Shield
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Jeep Liberty | 65th Anniversary Edition, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Wheelhouse Liner, Rear Driver Side Part Number: 55157413AB
$96.49
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Fender Side; Quarter Panel Splash Shield, Rear Left; Liner Fender Side
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Jeep Liberty | Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Fender Liner, Front Passenger Side Part Number: 55360144AG
$96.53 MSRP: $109.00
You Save: $12.47 (12%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Front Fender; Fender Splash Shield, Front Right; Liner Front Fender; Fender Splash Shield
- Position: Front Passenger Side
- Replaces: 55360144AE, 55360144AD, 55360144AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2004 Jeep Liberty | Limited, Renegade, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Fender Liner, Front Driver Side Part Number: 55157411AD
$72.91 MSRP: $108.00
You Save: $35.09 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Front Fender; Fender Splash Shield, Front Left; Liner Front Fender; Fender Splash Shield
- Position: Front Driver Side
- Replaces: 55157411AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Jeep Liberty | Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Fender Liner, Front Passenger Side Part Number: 55157410AD
$72.91 MSRP: $108.00
You Save: $35.09 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Front Fender; Fender Splash Shield, Front Right; Liner Front Fender; Fender Splash Shield
- Position: Front Passenger Side
- Replaces: 55157410AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Jeep Liberty | Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Fender Liner, Front Driver Side Part Number: 55157145AD
$105.19 MSRP: $121.00
You Save: $15.81 (14%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Front Fender; Fender Splash Shield, Front Left; Liner Front Fender; Fender Splash Shield
- Position: Front Driver Side
- Replaces: 55157145AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Jeep Liberty | Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Fender Liner, Front Driver Side Part Number: 55360145AG
$123.60 MSRP: $133.00
You Save: $9.40 (8%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Front Fender; Fender Splash Shield, Front Left; Liner Front Fender; Fender Splash Shield
- Position: Front Driver Side
- Replaces: 55360145AF, 55360145AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2004 Jeep Liberty | Limited, Renegade, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Wheelhouse Liner, Rear Passenger Side Part Number: 55360146AE
Product Specifications
- Other Name: Shield - Fender Side; Quarter Panel Splash Shield, Rear Right; Fender Splash Shield; Liner Fender Side
- Position: Rear Passenger Side
- Replaces: 55360146AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2007 Jeep Liberty | 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Fender Liner, Front Passenger Side Part Number: 55157144AD
Product Specifications
- Other Name: Shield - Front Fender; Fender Splash Shield, Front Right; Liner Front Fender; Fender Splash Shield
- Position: Front Passenger Side
- Replaces: 55157144AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Jeep Liberty | Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

Jeep Liberty Wheelhouse

Choose OEM Wheelhouse that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Wheelhouse follows strict manufacturing steps to lock in quality and fit. If your Jeep Liberty matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Liberty parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Liberty Wheelhouse Parts and Q&A

Fender Liner, Front Passenger Side
55157410AD
Q: How Does Wheelhouse Installation Affect the Front Fender Liner on Jeep Liberty?
A:
The first step is to put the front wheel house liner in the opening in the front wheel house. After that, fasten the wheel speed sensor harness onto the underside of the wheel house liner. Insert three push pins into each hole in the wheel house liner and fender inner wheelhouse. Once done, repeat with three push pins into each hole in the wheel house liner and front fascia. Secure the splash shield to the sill molding with a rivet, followed by installing all the left over push pins. Rivet a rivet into the wheel house liner and the front fascia hole and attach four other rivets to the molding of the front fender flare, the wheel house liner and to the fender. Reattach the wheel and the tire, then tighten the wheel nuts at 136 Nm (100 ft. lbs.).
Fender Liner, Front Driver Side
55157411AD
Q: How Does Wheelhouse Handle Front Fender Liner Service and Repair on Jeep Liberty?
A:
You should lift and support your vehicle before working on or repairing the fender liner. With the wheel and tire taken off, then you can access the front wheel house liner. Set aside four rivets from the front fender flare molding and remove the rivet holding the wheel-house liner to the undertray. Remove every push pin in the wheel house liner, separate the wheel speed sensor harness from it and then remove the front wheel house liner from the front wheel house opening.