How to Install a Yaw Sensor on Jeep Liberty?

Start by fixing the dynamics sensor (2) inside the vehicle when installing the yaw rate sensor. Then, secure the electrical connector (3) into the base of the sensor (2). Following this, fix the clamping bracket in place using two nuts (1) fastened to a torque of 9 Nm (80 in. lbs.). Reattach the floor console as the last step.

OEM Jeep Liberty Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
Jeep Liberty Modulator Valve Part Number: 56029433AB
$126.23 MSRP: $277.00
You Save: $150.77 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Dynamics; ABS Control Module; Sensor Dynamics Lateral Acceleration And Yaw Rate
- Replaces: 56029433AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Jeep Liberty | Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS

Jeep Liberty Yaw Sensor

Choose OEM Yaw Sensor that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Yaw Sensor follows strict manufacturing steps to lock in quality and fit. If your Jeep Liberty matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Liberty parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Liberty Yaw Sensor Parts and Q&A

Modulator Valve
56029433AB
Q: How to Install a Yaw Sensor on Jeep Liberty?
A:
Start by fixing the dynamics sensor (2) inside the vehicle when installing the yaw rate sensor. Then, secure the electrical connector (3) into the base of the sensor (2). Following this, fix the clamping bracket in place using two nuts (1) fastened to a torque of 9 Nm (80 in. lbs.). Reattach the floor console as the last step.