How to Remove a Brake Master Cylinder on Jeep Liberty?

Before you get to the brake master cylinder, be sure to drain the fluid tank 2. After that, take the fluid level electrical connector 3 off the reservoir 2. Subsequently, detach the brake lines at the front of the vehicle and remove the nuts from the brake master cylinder. After that, take out the brake master cylinder and pull off the cover to get out any remaining brake fluid. If repairs to the brake master cylinder reservoir are needed, refer to the Fluid Reservoir/Removal procedure in this section.

How to Properly Bleed a Brake Master Cylinder Before Installation on Jeep Liberty?

You should first bleed the vehicle before attaching a new brake master cylinder. You will need bleed tubes and a wood dowel to stroke the pistons, and bleed tubes can often be made from brake line. The first step is to hold the brake master cylinder in a vise for your safety. Next, put bleed tubes onto the cylinder's outlet ports and insert one end of the tube into each reservoir. Pour original brake fluid into the reservoir, then push the cylinder pistons in using the wooden handle. Allow the pistons to slide back down, guided by their springs, and keep bleeding the oil until you cannot see any bubbles in the liquid.

OEM Jeep Liberty Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Master Cylinders found

View related parts
Jeep Liberty Master Cylinder Part Number: 5072526AB
$206.17 MSRP: $428.00
You Save: $221.83 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2005 Jeep Liberty | Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Master Cylinder Part Number: 5189227AA
$842.92 MSRP: $1068.55
You Save: $225.63 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Jeep Liberty | 65th Anniversary Edition, Limited, Renegade, Sport | 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Master Cylinder Part Number: 68091278AE
$352.66 MSRP: $514.00
You Save: $161.34 (32%)
Product Specifications
- Other Name: Cylinder - Brake; Brake Master Cylinder; Master Cylinder Assembly; Master Cylinder Brake
- Replaces: 68091278AB, 68045998AB, 68091278AD, 68091278AC, 68091278AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012 Jeep Liberty | Jet, Limited, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Master Cylinder Part Number: 68004467AD
Product Specifications
- Other Name: Cylinder - Brake; Brake Master Cylinder; Master Cylinder Assembly
- Replaces: 68004467AC, 68004467AA, 68004467AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2011 Jeep Liberty | Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS

Jeep Liberty Brake Master Cylinder

Choose OEM Brake Master Cylinder that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Brake Master Cylinder follows strict manufacturing steps to lock in quality and fit. If your Jeep Liberty matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Liberty parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Brake Master Cylinder in Jeep Liberty automobile is as important as the heart is to the human body as it mechanically translates the pressure exerted by the driver's foot into hydraulic pressure that is used to manage the brakes. How it works is through the usage of hydraulic fluid to extend the calipers or the drum brakes and provide sufficient friction needed for the car to stop. Normally installed on the vacuum power booster which is situated on the front side of the vehicle, the Jeep Liberty Brake Master Cylinder is provided with either integrated or additional reservoir - the second option is the most widespread. Yearly, different Jeep Liberty models have incorporated dual circuit Brake Master Cylinders such that if one circuit ceases to function, the other one will be able to supply the necessary brake power. This design also serves as safety measure by enabling theContinued operation even with hydraulic failure. But problems like leakage of the Brake Master Cylinder fluid or internal problems can affect the performance of the CLK which makes it important to regularly check on the Brake Master Cylinder with a view of ensuring that the car brakes effectively.

Jeep Liberty Brake Master Cylinder Parts and Q&A

Master Cylinder
68004467AD
Q: How to Remove a Brake Master Cylinder on Jeep Liberty?
A:
Before you get to the brake master cylinder, be sure to drain the fluid tank 2. After that, take the fluid level electrical connector 3 off the reservoir 2. Subsequently, detach the Brake Lines at the front of the vehicle and remove the nuts from the brake master cylinder. After that, take out the brake master cylinder and pull off the cover to get out any remaining brake fluid. If repairs to the brake master cylinder reservoir are needed, refer to the Fluid Reservoir/Removal procedure in this section.
Master Cylinder
5189227AA
Q: How to Properly Bleed a Brake Master Cylinder Before Installation on Jeep Liberty?
A:
You should first bleed the vehicle before attaching a new brake master cylinder. You will need bleed tubes and a wood dowel to stroke the Pistons, and bleed tubes can often be made from Brake Line. The first step is to hold the brake master cylinder in a vise for your safety. Next, put bleed tubes onto the cylinder's outlet ports and insert one end of the tube into each reservoir. Pour original brake fluid into the reservoir, then push the cylinder pistons in using the wooden handle. Allow the pistons to slide back down, guided by their springs, and keep bleeding the oil until you cannot see any bubbles in the liquid.