Before servicing the ORC, turn off the SRS by detaching and isolating the negative
Battery Cable and wait for two minutes to discharge the system capacitor. Keep the ORC away from impacts, as drops may break the impact sensor which you will have to replace. First, take out the shifter bezel and pod from the top of the floor panel transmission tunnel. After that, take the jute covered panel and use it to expose the ORC's connections and fasteners. Loosen and lift off the nuts holding the ORC to the studs on the ORC mount welded above the floor transmission tunnel. With the release tab depressed, lift the lever on both instrument panel connectors, unplug each from its ORC connector receptacle and remove the ORC from its mount.