Put the antenna body and its attached cable into the fender when installing it. Push the
Antenna Cable out of the car via the fender hole, put the grommet in the hole in the side panel and attach the cable to the connector in the instrument panel. After that, attach the antenna nut and adapter and then the shroud if you have one. After that, put the inner fender shield and
Antenna Mast in place, check that they are snug at 5 Nm (46 in. lbs.) and make certain that there is no gap between the antenna mast and its base. Match the antenna cable to the instrument panel connector, place the right side cowl trim panel and finally link the battery negative cable.