How to Remove and Replace a Front Brake Caliper on Jeep Patriot?

Use a tool to keep the brake pedal down at least 1 inch before you start, to prevent brake fluid from leaving the master cylinder reservoir through the open lines. After that, raise and brace the car and then eliminate the three wheel mounting nuts and the wheel and tire assembly. Unscrew the banjo bolt holding the brake flex hose to the brake caliper and throw away the two washers with it. Be sure to place the special sleeve on the bolt when installing it into the upper mounting hole upon completion. Pull the disc brake caliper off the disc brake adapter and the brake pads to end the removal.

How to Properly Install a Rear Brake Caliper on Jeep Patriot?

First, attach the C-clamp to the brake caliper piston and draw it into the caliper so that the wood block on top doesn't let the piston move. Place the outboard brake pad onto the caliper so that the retaining clip sits in the places beyond the elevated retaining bead in the caliper. Insert the caliper onto the brake caliper adapter bracket, making sure you do not harm the guide pin boots. After installing the caliper guide pin bolts, put them in place exactly as they were before the wheel came off, remembering that only the bolt with the special sleeve may be moved. Screw both lower and upper caliper guide pin bolts together with a special sleeve through the bracket holes that match their holes. After you have installed the outboard brake pad, look at it to verify that the retaining clip is seated properly and that the nubs on the back plate of the pad are all in the caliper fingers. Place the flexible hose from the rear brake into the brake caliper and screw on the nut until it reaches 15 Nm or 133 in. lbs. Feed the brake flex hose into the bracket for the trailing link and make sure to lock it with the clip. Place the nut onto the brake tube in the brake flex hose and fasten it until it reaches 17 Nm (150 in. lbs.). Fit the wheel and tire assembly, tighten each mounting nut to 135 Nm (100 ft. lbs.) using a wrench and then remove your vehicle and take away the holding tool for the brake pedal. Bleed the calipers and go for a road test, making a few stops to pull off anything that may be stuck on the brakes and have the brake shoes adjusted.

OEM Jeep Patriot Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Calipers found

View related parts
Jeep Patriot Caliper, Rear Passenger Side Part Number: 5191268AA
$85.72 MSRP: $129.00
You Save: $43.28 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Right; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Patriot | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Caliper, Front Driver Side Part Number: 5191239AA
$113.04 MSRP: $171.00
You Save: $57.96 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left; Caliper Assembly Disc Brake Front; Brake Caliper
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Patriot | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Caliper, Rear Driver Side Part Number: 68020261AB
$125.07 MSRP: $188.00
You Save: $62.93 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Patriot | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Caliper, Rear Driver Side Part Number: 5191267AA
$85.72 MSRP: $129.00
You Save: $43.28 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Patriot | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Caliper, Front Passenger Side Part Number: 5191238AA
$130.02 MSRP: $181.00
You Save: $50.98 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Right; Caliper Assembly Disc Brake Front; Brake Caliper
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Patriot | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Caliper, Rear Passenger Side Part Number: 68020252AB
$108.84 MSRP: $145.00
You Save: $36.16 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Right; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Passenger Side
- Replaces: 68020252AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Patriot | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Jeep Patriot Brake Caliper

Choose OEM Brake Caliper that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Brake Caliper follows strict manufacturing steps to lock in quality and fit. If your Jeep Patriot matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Patriot parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Brake Caliper is an integral part for the Jeep Patriot as it is responsible in utilizing hydraulic pressure obtained from the master cylinder and apply mechanical force. This force squeezes the brake pads against the rotors which has the effect of either slowing the vehicle or stopping the vehicle. Jeep Patriot models utilize two primary types of Brake Calipers: A pair of distinct maritime programs, namely fixed and floating. When we have fixed calipers, there are many pistons on the top and the bottom of the vehicles' rotor and ensure constant pressure during its usage while, when we analyze floating calipers there is only one piston on the top and slides downwards for pressure build up, problems like uneven pad wear may occur if not well maintained. Since then Jeep Patriot Brake Calipers have been developed for regular and racing use in cars. Conventional ones are for normal road use, application-oriented ones provide better braking and looking and are designed for performance oriented use. The type of caliper can truly affect the vehicle's braking capacity and performance so choosing between these caliper types can be a great concern.

Jeep Patriot Brake Caliper Parts and Q&A

Caliper, Front Passenger Side
5191238AA
Q: How to Remove and Replace a Front Brake Caliper on Jeep Patriot?
A:
Use a tool to keep the brake pedal down at least 1 inch before you start, to prevent brake fluid from leaving the master cylinder reservoir through the open lines. After that, raise and brace the car and then eliminate the three wheel mounting nuts and the wheel and tire assembly. Unscrew the banjo bolt holding the brake flex hose to the brake caliper and throw away the two washers with it. Be sure to place the special sleeve on the bolt when installing it into the upper mounting hole upon completion. Pull the disc brake caliper off the disc brake adapter and the Brake Pads to end the removal.
Caliper, Rear Driver Side
5191267AA
Q: How to Properly Install a Rear Brake Caliper on Jeep Patriot?
A:
First, attach the C-clamp to the brake caliper piston and draw it into the caliper so that the wood block on top doesn't let the piston move. Place the outboard Brake Pad onto the caliper so that the retaining clip sits in the places beyond the elevated retaining bead in the caliper. Insert the caliper onto the brake caliper adapter bracket, making sure you do not harm the guide pin boots. After installing the caliper guide pin bolts, put them in place exactly as they were before the wheel came off, remembering that only the bolt with the special sleeve may be moved. Screw both lower and upper caliper guide pin bolts together with a special sleeve through the bracket holes that match their holes. After you have installed the outboard brake pad, look at it to verify that the retaining clip is seated properly and that the nubs on the back plate of the pad are all in the caliper fingers. Place the flexible hose from the rear brake into the brake caliper and screw on the nut until it reaches 15 Nm or 133 in. lbs. Feed the brake flex hose into the bracket for the trailing link and make sure to lock it with the clip. Place the nut onto the brake tube in the brake flex hose and fasten it until it reaches 17 Nm (150 in. lbs.). Fit the wheel and tire assembly, tighten each mounting nut to 135 Nm (100 ft. lbs.) using a wrench and then remove your vehicle and take away the holding tool for the brake pedal. Bleed the calipers and go for a road test, making a few stops to pull off anything that may be stuck on the brakes and have the brake shoes adjusted.