OEM Jeep Patriot Fuel Pump

Jeep Patriot Fuel Pump Parts and Q&A

• Module - Fuel Pump/Level Unit
  5183201AH
  Q: How to Maintain a Fuel Pump on Jeep Patriot?

  A:

  Before working on the fuel pump, remove the pressure from the fuel system, work in a well-ventilated area that is away from flames and do not smoke nearby. To start, remove the lid from the air cleaner, disconnect the inlet air temperature sensor and the makeup air hose and only after that disconnect the negative Battery Cable. After that, get out the rear Seat Cushion and its plastic cover and make sure to clean the top of the Fuel Tank from any unattached trash or dirt. Use tool #9340 to take off the left side module lock ring and remember that the fuel pump should be positioned on top of the fuel tank, so the fuel gauge works precisely. Gently take out the fuel module, so no fuel is splashed in the car's interior and drain fuel from the pump module, making sure not to cause any mess inside.
• Module - Fuel Pump/Level Unit
  5183202AG
  Q: How to Safely and Effectively Service a Fuel Pump on Jeep Patriot?

  A:

  To service the fuel level sensor to begin with, you need to relieve the fuel system pressure for safety, work in a well ventilated area away from ignition sources and no smoking. Remove the air cleaner lid, disconnect the inlet air temperature sensor and the makeup air hose and disconnect the negative Battery Cable. The next is to take out the plastic cover and rear Seat Cushion. Clean the top of the Fuel Tank, removing any loose dirt or debris. Use special tool #9340 to remove the left side module lock ring and the location of the fuel pump on top of the fuel tank is important that the fuel gauge will operate correctly. Getting the module out of the fuel tank has to be done carefully, no fuel should spill in the vehicle and draining the fuel from the fuel pump module must be done without spilling fuel in the interior.