How to Service a Yaw Sensor on Jeep Patriot?

Before starting to work on the Yaw Rate Sensor, you should disconnect and cut off the battery negative cable from the post. Also, remove the shifter housing center console. Connect the quick-connectors at both the dynamics sensor and the control unit together. Following that, remove the nuts that secure the dynamics sensor to the floor pan tunnel and then take the sensor off.

How Does a Yaw Sensor Get Installed on Jeep Patriot?

To install the yaw rate sensor, put the dynamics sensor onto the studs bolted to the floor pan tunnel and attach it with the two mounting nuts, tightening them to 9 Nm (80 in. lbs.). After that, you should connect the wiring harness connector to the dynamics sensor. At this stage, place the shifter housing center console back into position and securely tighten the battery negative cable onto the battery post. Carry out the Verification Test at the last stage and deal with any issues you identify.

OEM Jeep Patriot Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Yaw Sensors found

View related parts
Jeep Patriot Yaw Rate Sensor Part Number: 56038985AB
$154.99 MSRP: $234.00
You Save: $79.01 (34%)
ADD TO CART
Product Specifications
- Other Name: Module - Dynamics; Electronic Stability System Control Module; Stab Control Module
- Replaces: 56038985AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2017 Jeep Patriot | 75th Anniversary, Latitude, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Yaw Rate Sensor Part Number: 56038984AB
$171.08 MSRP: $255.00
You Save: $83.92 (33%)
Product Specifications
- Other Name: Module - Dynamics; Electronic Stability System Control Module; Stab Control Module
- Replaces: 56038984AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2017 Jeep Patriot | 75th Anniversary, Latitude, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Yaw Rate Sensor Part Number: 5033322AC
Product Specifications
- Other Name: Module - Electronic Stability; Control Module; Stab Control Module; Sensor Dynamics Lateral Acceleration And Yaw Rate
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Jeep Patriot | Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Yaw Rate Sensor Part Number: 56029482AA
Product Specifications
- Other Name: Module - Dynamics; Control Module; Stab Control Module; Sensor Dynamics Lateral Acceleration And Yaw Rate
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2012 Jeep Patriot | Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Stab Control Module Part Number: 5033321AC
Product Specifications
- Other Name: Module - Electronic Stability; Sensor Dynamics Lateral Acceleration And Yaw Rate
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Jeep Patriot | Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Yaw Rate Sensor Part Number: 56029429AA
Product Specifications
- Other Name: Sensor - Dynamics; Control Module; Stab Control Module; Sensor Dynamics Lateral Acceleration And Yaw Rate
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2012 Jeep Patriot | Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Jeep Patriot Yaw Sensor

Choose OEM Yaw Sensor that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Yaw Sensor follows strict manufacturing steps to lock in quality and fit. If your Jeep Patriot matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Patriot parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Patriot Yaw Sensor Parts and Q&A

Stab Control Module
5033321AC
Q: How to Service a Yaw Sensor on Jeep Patriot?
A:
Before starting to work on the Yaw Rate Sensor, you should disconnect and cut off the battery negative cable from the post. Also, remove the shifter housing center console. Connect the quick-connectors at both the dynamics sensor and the control unit together. Following that, remove the nuts that secure the dynamics sensor to the floor pan tunnel and then take the sensor off.
Yaw Rate Sensor
5033322AC
Q: How Does a Yaw Sensor Get Installed on Jeep Patriot?
A:
To install the yaw rate sensor, put the dynamics sensor onto the studs bolted to the floor pan tunnel and attach it with the two mounting nuts, tightening them to 9 Nm (80 in. lbs.). After that, you should connect the wiring harness connector to the dynamics sensor. At this stage, place the shifter housing center console back into position and securely tighten the battery negative cable onto the battery post. Carry out the Verification Test at the last stage and deal with any issues you identify.