How to Install a Cigarette Lighter in an Auxiliary Power Outlet on Jeep Wrangler?

When adding the auxiliary cigarette lighter, the mount ring goes on the panel and the wires are guided through the ring. Then, place the cap and mount ring together at the 9 o'clock position near the key in the panel before installing it. Join the wires with the base, making sure the base's alignment rib (at 11 o'clock) matches the groove in the mount ring at the matching position. Fit the base into the bezel so that it's held firmly, then fit the cover for the cigarette lighter and add the cable from the battery negative to the igniter assembly.

How to Service the Cigarette Lighter Power Outlet on Jeep Wrangler?

The first step to working on the cigarette lighter is to isolate the battery's negative cable by grounding it. Lift the knob and its element out from the bottom of the cigarette lighter receptacle or pull the grip off the cigarette lighter receptacle base to remove its cover. Notice where the rectangular retaining bosses are located on the receptacle base attached to the instrument panel. Use an external set of snap ring pliers on the tips to quickly disconnect, carefully rocking the pliers to yank the base from the mount. Leave the receptacle behind, but carefully pull away the base of the instrument panel to reach the wire harness connector. Disconnect the connector from the wire harness base. Remove the mount from the middle of your instrument panel. When installing, plug the instrument panel wire harness connector into the receptacle base, then fit the mount into the panel by matching the splines from the connector to the grooves on the mount. Firmly press until the retaining bosses are lined up in place. After that, put the cigarette lighter knob and element or cap back in place and attach the negative battery cable.

OEM Jeep Wrangler Cigarette Lighter

Car Cigarette Lighter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Cigarette Lighters found

View related parts
Jeep Wrangler Power Outlet, Front Part Number: 4685536
$27.72 MSRP: $40.15
You Save: $12.43 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lighter - Cigar Lighter; 12 Volt Accessory Power Outlet, Center; Cigarette Lighter Element, Front.; Lighter Assembly; Knob & Element for Cigar Lighter; Cigarette Lighter.
- Position: Front
- Replaces: 4685536AB, 5ZN46DX9AA, 5ZN46LXHAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2010, 1987-1995 Jeep Wrangler | 65th Anniversary Edition, Base, Islander, Laredo, Renegade, Rio Grande, Rubicon, S, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS
View related parts
Jeep Wrangler Power Outlet, Center Part Number: 4793554AC
$24.35 MSRP: $36.05
You Save: $11.70 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lighter; 12 Volt Accessory Power Outlets: Rear Right, Rear Left, Center, Front, Rear; Housing; Cigarette Lighter Socket.; Power Outlet Mount; Armrest Outlet; Power Outlet Cigar; Power Outlet Power
- Position: Center
- Replaces: 4793554AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2010 Jeep Wrangler | 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 2.4L L4, 4 Cyl 2.4 L GAS, 4.0L L6, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Wrangler Power Outlet, Front Part Number: 4685590
$26.67 MSRP: $39.45
You Save: $12.78 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Outlet; 12 Volt Accessory Power Outlet Housing, Front; Center; Cigarette Lighter Socket.; Lighter Socket; Power Outlet Base; Cigar Lighter Base; Serviced Without Cap.
- Position: Front
- Replaces: 4685590AB, 5026362AA, 6AL38DX9AA, 6AL38LXHAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2024-2025, 2007-2010 Jeep Wrangler | Rubicon, Rubicon X, Sahara, Sport, Sport S, Unlimited High Altitude 4xe, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sport, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Unlimited X, Willys, Willys Sport, X | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Lighter Assembly, Front Part Number: 4685370
$18.22 MSRP: $39.35
You Save: $21.13 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lighter - Cigar Lighter; Cigarette Lighter Element, Center, Front; Element; Lighter; Knob And Element Cigar Lighter; Cigarette Lighter
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-1999 Jeep Wrangler | SE, Sahara, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Wrangler Power Outlet Part Number: 68347427AB
$33.24 MSRP: $49.60
You Save: $16.36 (33%)
ADD TO CART
Product Specifications
- Other Name: Connector - Inverter
- Replaces: 68347427AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2024-2025 Jeep Wrangler | Rubicon, Rubicon X, Sport, Sport S, Unlimited High Altitude 4xe, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sport, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Willys, Willys Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L GAS, 8 Cyl 6.4 L GAS
- 2018-2021 Jeep Wrangler | 2.0L L4, 3.0L V6, 3.6L V6

Jeep Wrangler Cigarette Lighter

Choose OEM Cigarette Lighter that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Cigarette Lighter follows strict manufacturing steps to lock in quality and fit. If your Jeep Wrangler matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Wrangler parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Cigarette Lighter is one of such application, which is indeed considered as a hardworking and reliable part of Jeep Wrangler automobiles responsible for supplying electrical energy to miscellaneous electric devices. Originally commonly used to ignite cigarettes, today it has a "modern" 'automatic' V-Coil version contributing to its versatility to power most devices. This shift is done in line with the Jeep Wrangler brand's mission to deliver to the clients what they require while on the road most especially charging of their electronics gadgets. Designed for Wrangler two-door and four-door long-wheelbase "Wrangler Unlimited," Cigarette Lighter serves a very important purpose of not only providing car owners with the possibility to improve the functions and ergonomics of their automobiles but also make driving safer. It possesses the WRANGLER characteristic to maintain Jeep's distinctiveness and also offers requisite power to charge portable electronics - it makes this automotive component exquisite in the market. The durability of Jeep Wrangler is still reinforced by the originality of the Cigarette Lighter, which has been also used in this car model since its establishment. Thus, Cigarette Lighter remains a tradition in newly developed Jeep models, while embracing innovation, for example, with the help of a plug-in hybrid Wrangler 4xe, thus letting Jeep fans enjoy such amenities while preserving the Wrangler model's traditional off-road capabilities. Altogether, it can be affirmed that the Cigarette Lighter is one of the splendid examples of the Jeep concern's commitment to the superior quality and continuous development of the brand, so it is an irreplaceable component of the Jeep project.

Jeep Wrangler Cigarette Lighter Parts and Q&A

Power Outlet, Front
4685590
Q: How to Install a Cigarette Lighter in an Auxiliary Power Outlet on Jeep Wrangler?
A:
When adding the auxiliary cigarette lighter, the mount ring goes on the panel and the wires are guided through the ring. Then, place the cap and mount ring together at the 9 o'clock position near the key in the panel before installing it. Join the wires with the base, making sure the base's alignment rib (at 11 o'clock) matches the groove in the mount ring at the matching position. Fit the base into the bezel so that it's held firmly, then fit the cover for the cigarette lighter and add the cable from the battery negative to the igniter assembly.
Power Outlet, Center
4793554AC
Q: How to Service the Cigarette Lighter Power Outlet on Jeep Wrangler?
A:
The first step to working on the cigarette lighter is to isolate the battery's negative cable by grounding it. Lift the knob and its element out from the bottom of the cigarette lighter receptacle or pull the grip off the cigarette lighter receptacle base to remove its cover. Notice where the rectangular retaining bosses are located on the receptacle base attached to the instrument panel. Use an external set of snap ring pliers on the tips to quickly disconnect, carefully rocking the pliers to yank the base from the mount. Leave the receptacle behind, but carefully pull away the base of the instrument panel to reach the wire harness connector. Disconnect the connector from the wire harness base. Remove the mount from the middle of your instrument panel. When installing, plug the instrument panel wire harness connector into the receptacle base, then fit the mount into the panel by matching the splines from the connector to the grooves on the mount. Firmly press until the retaining bosses are lined up in place. After that, put the cigarette lighter knob and element or cap back in place and attach the negative Battery Cable.