How to Locate, Remove, and Install a Knock Sensor on 2000 Dodge Caravan?

The knock sensor which is found on the cylinder block near the starter is removed by disconnecting its electrical connector, using a crow foot socket. Tighten it to 10 Nm (7 ft. lbs.) for installation and ensure proper performance, then reconnect the electrical connector.

OEM 2000 Dodge Caravan Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Knock Sensors found

View related parts
2000 Dodge Caravan Knock Sensor Part Number: 4686362AB
Product Specifications
- Other Name: Sensor - Knock; Sensor Knock
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4686362AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Caravan Submodels:
- Base, C/V, ES, LE, SE, Sport | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Dodge Caravan Knock Sensor Part Number: 4557667
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; Sensor, Knock, 3.3-3.8 Engine; Sensor, Knock; Sensor Knock
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4557667
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Caravan Submodels:
- Base, ES, Ec, SE | 4 Cyl 2.4 L GAS

2000 Dodge Caravan Knock Sensor Parts and Q&A

Q: How to Locate, Remove, and Install a Knock Sensor on 2000 Dodge Caravan?
A: The knock sensor which is found on the cylinder block near the starter is removed by disconnecting its electrical connector, using a crow foot socket. Tighten it to 10 Nm (7 ft. lbs.) for installation and ensure proper performance, then reconnect the electrical connector.