How Can the Idle Control Valve Be Serviced and Reinstalled on the Throttle Body on 2000 Dodge Dakota?

You should start by pulling off the air duct at the throttle body and taking off the IAC motor's connector before you begin to service the IAC motor. After that, take out the two bolts that hold the IAC motor to the throttle body. Begin by putting the IAC motor onto the throttle body, fasten it with the two bolts and tighten them until you reach 7 Nm. Insert the air duct into the throttle body and secure them together electrically.

OEM 2000 Dodge Dakota Idle Control Valve

IACV

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Idle Control Valves found

View related parts
2000 Dodge Dakota Idle Speed Control Part Number: 53030657AD
$105.09 MSRP: $155.00
You Save: $49.91 (33%)
Product Specifications
- Other Name: Motor - Air Idle Speed; Fuel Injection Idle Air Control Valve; Idle Air Control Valve; Idle Control Motor; Idle Speed Control Motor
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53030657AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Dakota Submodels:
- Base, R/T, SLT, SXT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Dakota Idle Speed Control Part Number: 53030840AC
Product Specifications
- Other Name: Motor - Air Idle Speed; Fuel Injection Idle Control Valve; Idle Control Motor; Idle Speed Control Motor
- Replaces: 53030840AB, 53030840
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53030840AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Dakota Submodels:
- Base, SLT, Sport | 4.7L V8, 8 Cyl 4.7 L GAS

2000 Dodge Dakota Idle Control Valve Parts and Q&A

Q: How Can the Idle Control Valve Be Serviced and Reinstalled on the Throttle Body on 2000 Dodge Dakota?
A: You should start by pulling off the air duct at the throttle body and taking off the IAC motor's connector before you begin to service the IAC motor. After that, take out the two bolts that hold the IAC motor to the throttle body. Begin by putting the IAC motor onto the throttle body, fasten it with the two bolts and tighten them until you reach 7 Nm. Insert the air duct into the throttle body and secure them together electrically.