JeepParts
My Garage
My Account
Cart
OEM 2000 Dodge Dakota Rack And Pinion
Steering Rack And Pinion- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Rack And Pinions found
2000 Dodge Dakota Steering Gear Part Number: 52106405AO
$737.81 MSRP: $1075.00You Save: $337.19 (32%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Gear - Rack And Pinion; Steering Gearbox; Steering Gear Assembly
- Replaced by: 52106405AP
- Item Weight: 25.50 Pounds
- Item Dimensions: 61.5 x 10.6 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106405AO
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Dakota Steering Gear Part Number: 52106477AJ
Product Specifications- Other Name: Gear - Rack And Pinion; Rack and Pinion Assembly; Steering Gearbox; Gear Assembly; Steering Gear Assembly
- Replaces: 52106477AG, 52106477AI, 52106477AD, 52106477AC, 52106477AE, 52106477AF, 52106477AB, 52106477AH
- Item Weight: 24.90 Pounds
- Item Dimensions: 62.0 x 10.2 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106477AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Dakota Gear Assembly Part Number: 52106405AP
Product Specifications- Other Name: Gear - Rack And Pinion; Rack and Pinion Assembly
- Replaces: 52106405AG, 52106405AJ, 52106405AE, 52106405AM, 52106405AD, 52106405AH, 52106405AN, 52106405AF, 52106405AK, 52106405AI, 52106405AO, 52106405AC
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106405AP
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Dakota Rack And Pinion Parts and Q&A
- Q: How to Service and Repair a Rack and Pinion Steering Gear on 2000 Dodge Dakota?A: Before you can work on the rack and pinion, raise the vehicle, remove the nuts from the tie rod ends and use Puller C-3894-A to part the tie rod ends from the knuckles. Then, cut the power steering lines from the rack and pinion, take out the lower coupler bolt and slip the coupler off the rack and pinion. When that is done, pull out the bolts connecting the rack and pinion to the front crossmember and lift out the rack and pinion. Make sure to check the bushings before fitting the new equipment and swap out any that need it. Place the rack and pinion onto the front crossmember and fasten the bolts with 258 Nm (190 ft. lbs.) of force. Slide the shaft coupler over the rack and pinion, place a new bolt in the shaft and tighten it to 49 Nm (36 ft. lbs.). Clean the ends of the tie rod studs and the tapers on the knuckles and then join the tie rod ends to the knuckles, keeping the nuts at 108 Nm (80 ft. lbs.). Secure the power steering lines to the rack and pinion, take off the support and drop the car. Fill the tank with fluid, turn on the Power Steering Pump and after that, check and adjust the toe position during the Workshop Initial Operation.
Related 2000 Dodge Dakota Parts
2000 Dodge Dakota Power Steering Pump
2000 Dodge Dakota Power Steering Hose
2000 Dodge Dakota Power Steering Reservoir
2000 Dodge Dakota Steering Column
2000 Dodge Dakota Steering Shaft
2000 Dodge Dakota Steering Wheel
2000 Dodge Dakota Drag Link
2000 Dodge Dakota Power Steering Cooler
2000 Dodge Dakota Rack & Pinion Bushing
2000 Dodge Dakota Rack and Pinion Boot
2000 Dodge Dakota Tie Rod Bushing
2000 Dodge Dakota Tie Rod End