How to Properly Bleed a Brake Master Cylinder Before Installation on 2000 Dodge Durango?

It is required to bleed a new brake master cylinder before installing it. Needed tools are bleed tubes and a wood dowel for pushing the pistons and bleed tubes that can be made from brake line. Install the brake master cylinder in a vise and put the two bleed tubes into the ports on the cylinder; with each tube, pop the end into the reservoir. After filling, activate the pistons to allow the spring to return them, until no air bubbles remain in the oil you're bleeding out.

OEM 2000 Dodge Durango Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

View related parts
2000 Dodge Durango Master Cylinder Part Number: 5093049AA
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 2.70 Pounds
- Item Dimensions: 10.9 x 7.9 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093049AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Durango Reservoir Part Number: 4882865
Product Specifications
- Other Name: Master Cylinder - Brake Master Cylinder; Brake Master Cylinder Reservoir; Reservoir Brake Master Cylinder
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4882865
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Durango Brake Master Cylinder Parts and Q&A

Q: How to Properly Bleed a Brake Master Cylinder Before Installation on 2000 Dodge Durango?
A: It is required to bleed a new brake master cylinder before installing it. Needed tools are bleed tubes and a wood dowel for pushing the pistons and bleed tubes that can be made from brake line. Install the brake master cylinder in a vise and put the two bleed tubes into the ports on the cylinder; with each tube, pop the end into the reservoir. After filling, activate the pistons to allow the spring to return them, until no air bubbles remain in the oil you're bleeding out.