How to Remove and Install a Steering Column Cover on 2000 Dodge Durango?

Before taking off the steering column opening cover, you have to switch off the air bag system by removing and isolating the battery negative cable and then wait for two minutes. After that, lie under the left end of the instrument panel to get the park brake release link clip and unsnap it from the handle. Take out the three screws connecting the bottom of the steering column opening cover to the instrument panel support. With the C-4755 or similar trim stick, gently lift up on the upper edge of the steering column opening cover just below the cluster bezel on each side of the wheel and as the snap clip retainers unlock from the base of the trim, remove the cover. For installation, tilt the steering column opening cover downward to the instrument panel and push the snap clip retainers onto the receptacles in the instrument panel base trim. Firmly push on the cover at the snap clip areas, so only the grooves are visible. Screw in the three screws that fasten the lower border of the cover to the frame and after that slide under the left part of the instrument panel and connect the back of the park brake handle to the release link with the clip. After that, link the battery negative end to the engine block.

OEM 2000 Dodge Durango Steering Column Cover

Steering Column Cover Bezel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Steering Column Covers found

View related parts
2000 Dodge Durango Upper Shroud Part Number: 5CE58JX8AB
$106.04 MSRP: $134.43
You Save: $28.39 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Upper; Lower Shroud; Upper Cover; Shroud; Shroud Steering Column
- Position: Upper
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5CE58JX8AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Durango Lower Cover Part Number: 5CT42JX8AD
$87.37 MSRP: $101.00
You Save: $13.63 (14%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Lower; Lower Shroud; Shroud; Shroud Steering Column
- Position: Lower
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5CT42JX8AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Durango Lock Cover, Lower Part Number: KJ95JX8AB
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Lower; Lower Shroud; Lower Lock Housing Shroud; Lower Lock Housing Cover; Lock Housing Cover; Shroud; Shroud Steering Column
- Position: Lower
- Replaces: 5DW57PX8
- Item Weight: 1.00 Pounds
- Item Dimensions: 4.3 x 5.6 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: KJ95JX8AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Durango Lower Column Cover Part Number: 5DX27VK9AC
Product Specifications
- Other Name: Cover - Instrument Panel; Instrument Panel Knee Bolster; Steering Column Cover, Lower
- Position: Lower
- Item Weight: 1.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5DX27VK9AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Durango Lower Column Cover Part Number: 5DX27LAZAC
Product Specifications
- Other Name: Cover - Instrument Panel; Instrument Panel Knee Bolster; Steering Column Cover, Lower
- Position: Lower
- Item Weight: 1.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5DX27LAZAC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Durango Lower Column Cover, Gray Part Number: 5DX27RC8AC
Product Specifications
- Other Name: Cover - Instrument Panel; Instrument Panel Knee Bolster; Steering Column Cover, Lower
- Position: Lower
- Replaces: 5DX27RC8AB
- Item Weight: 1.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5DX27RC8AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, Sport | 3.9L V6, 4.7L V8, 5.2L V8, 5.9L V8, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Durango Steering Column Cover Parts and Q&A

Q: How to Remove and Install a Steering Column Cover on 2000 Dodge Durango?
A: Before taking off the steering column opening cover, you have to switch off the air bag system by removing and isolating the battery negative cable and then wait for two minutes. After that, lie under the left end of the instrument panel to get the park brake release link clip and unsnap it from the handle. Take out the three screws connecting the bottom of the steering column opening cover to the instrument panel support. With the C-4755 or similar trim stick, gently lift up on the upper edge of the steering column opening cover just below the cluster bezel on each side of the wheel and as the snap clip retainers unlock from the base of the trim, remove the cover. For installation, tilt the steering column opening cover downward to the instrument panel and push the snap clip retainers onto the receptacles in the instrument panel base trim. Firmly push on the cover at the snap clip areas, so only the grooves are visible. Screw in the three screws that fasten the lower border of the cover to the frame and after that slide under the left part of the instrument panel and connect the back of the park brake handle to the release link with the clip. After that, link the battery negative end to the engine block.