How to Service and Repair a Rack and Pinion Steering System on 2000 Dodge Durango?

Remove the rack and pinion from the vehicle first to work on it. Remove the jam nut and then lift out the tie rod end with it. After that, take off the rubber boot's outer clamp and the inner clamp that holds them in place individually. Mark where the breather tube is on the steering arm before you take off the rubber boot on a 4x2 vehicle. Make sure to coat the inside of the boot outer groove (also called tie rod) with silicone and ensure the boot isn't twisted when installing. Tuck the breather tube below the reference mark on the rack and pinion and then fix the new boot over the housing for 4x2 cars. Place the small, inner clamp inside the rubber boot, then install the large snorkel clamp to the underside of the 4x2 vehicle. Following this, fit the outer clamp onto the inner tie rod and, next, the jam nut and tie rod end. After that, slide on the rack and pinion.

OEM 2000 Dodge Durango Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Rack And Pinions found

View related parts
2000 Dodge Durango Steering Gear Part Number: 52106405AO
$737.81 MSRP: $1075.00
You Save: $337.19 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear - Rack And Pinion; Steering Gearbox; Steering Gear Assembly
- Replaced by: 52106405AP
- Item Weight: 25.50 Pounds
- Item Dimensions: 61.5 x 10.6 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106405AO
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Durango Steering Gear Part Number: 5083169AB
Product Specifications
- Other Name: Gear - Power Steering; Rack and Pinion Assembly; Steering Gearbox; Gear Assembly
- Replaces: 5083169AA
- Item Weight: 24.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5083169AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Durango Steering Gear Part Number: 52106477AJ
Product Specifications
- Other Name: Gear - Rack And Pinion; Rack and Pinion Assembly; Steering Gearbox; Gear Assembly; Steering Gear Assembly
- Replaces: 52106477AG, 52106477AI, 52106477AD, 52106477AC, 52106477AE, 52106477AF, 52106477AB, 52106477AH
- Item Weight: 24.90 Pounds
- Item Dimensions: 62.0 x 10.2 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106477AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 3.9L V6, 4.7L V8, 5.2L V8, 5.9L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Durango Gear Assembly Part Number: 52106405AP
Product Specifications
- Other Name: Gear - Rack And Pinion; Rack and Pinion Assembly
- Replaces: 52106405AG, 52106405AJ, 52106405AE, 52106405AM, 52106405AD, 52106405AH, 52106405AN, 52106405AF, 52106405AK, 52106405AI, 52106405AO, 52106405AC
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106405AP
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 3.9L V6, 4.7L V8, 5.9L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Durango Rack And Pinion Parts and Q&A

Q: How to Service and Repair a Rack and Pinion Steering System on 2000 Dodge Durango?
A: Remove the rack and pinion from the vehicle first to work on it. Remove the jam nut and then lift out the tie rod end with it. After that, take off the rubber boot's outer clamp and the inner clamp that holds them in place individually. Mark where the breather tube is on the steering arm before you take off the rubber boot on a 4x2 vehicle. Make sure to coat the inside of the boot outer groove (also called tie rod) with silicone and ensure the boot isn't twisted when installing. Tuck the breather tube below the reference mark on the rack and pinion and then fix the new boot over the housing for 4x2 cars. Place the small, inner clamp inside the rubber boot, then install the large snorkel clamp to the underside of the 4x2 vehicle. Following this, fit the outer clamp onto the inner tie rod and, next, the jam nut and tie rod end. After that, slide on the rack and pinion.