How to remove and install the Oxygen Sensor(s) located at the catalytic converter on 2000 Dodge Ram 1500 Van?

The O2S sensors are at the inlet and outlet of the catalytic converter. The engine should be cooled before removal and that the connector is not greased. Carefully disconnect the wire, take off with device to remove and install the new sensor with factory anti-seize. Tighten until 30 Nm and reconnect the wire before lowering the vehicle.

OEM 2000 Dodge Ram 1500 Van Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oxygen Sensors found

View related parts
2000 Dodge Ram 1500 Van Oxygen Sensor, Front Driver Side Part Number: 56041213AF
$132.51 MSRP: $199.00
You Save: $66.49 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left; Rear Oxygen Sensor; Front Oxygen Sensor; Sensor Oxygen
- Position: Front Driver Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.1 x 1.0 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041213AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 1500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 1500 Van Oxygen Sensor, Rear Part Number: 56041212AF
$141.50 MSRP: $212.00
You Save: $70.50 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Rear; Rear Oxygen Sensor; Front Oxygen Sensor; Sensor Oxygen
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 1.0 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041212AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 1500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Ram 1500 Van Oxygen Sensor Parts and Q&A

Q: How to remove and install the Oxygen Sensor(s) located at the catalytic converter on 2000 Dodge Ram 1500 Van?
A: The O2S sensors are at the inlet and outlet of the catalytic converter. The engine should be cooled before removal and that the connector is not greased. Carefully disconnect the wire, take off with device to remove and install the new sensor with factory anti-seize. Tighten until 30 Nm and reconnect the wire before lowering the vehicle.