How to Service and Repair an A/C Clutch on 2000 Dodge Ram 3500?

To fix the compressor clutch, one will need to disconnect battery, unplug the coil then special tools are needed to remove the clutch plate and snap ring. Check wear parts, change where required, and re-fit in that order. Once installed, turn the clutch 20 times to fit the friction surfaces until the torque is enhanced.

OEM 2000 Dodge Ram 3500 A/C Clutch

Air Conditioning Clutch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 A/C Clutches found

View related parts
2000 Dodge Ram 3500 Clutch Coil Part Number: 5016127AB
$256.18 MSRP: $377.00
You Save: $120.82 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch - A/C Compressor; A/C Compressor Clutch; Clutch; Clutch A/C Compressor
- Item Weight: 5.10 Pounds
- Item Dimensions: 6.8 x 6.4 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5016127AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 3500 Submodels:
- Base, Laramie, SLT, ST | 6 Cyl 5.9 L DIESEL
View related parts
2000 Dodge Ram 3500 Clutch & Pulley Part Number: 4882008
Product Specifications
- Other Name: Clutch - A/C Compressor; A/C Compressor Clutch; Clutch Coil; Clutch; Clutch A/C Compressor
- Item Weight: 6.00 Pounds
- Item Dimensions: 6.8 x 6.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4882008
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS

2000 Dodge Ram 3500 A/C Clutch Parts and Q&A

Q: How to Service and Repair an A/C Clutch on 2000 Dodge Ram 3500?
A: To fix the compressor clutch, one will need to disconnect battery, unplug the coil then special tools are needed to remove the clutch plate and snap ring. Check wear parts, change where required, and re-fit in that order. Once installed, turn the clutch 20 times to fit the friction surfaces until the torque is enhanced.