OEM 2000 Dodge Ram 3500 Blower Motor

2000 Dodge Ram 3500 Blower Motor Parts and Q&A

• Q: How to Service a Blower Motor on 2000 Dodge Ram 3500?

  A: Before you service the blower motor, you should first separate and cut the connection of the battery's negative cable. Detach the blower motor fan cooling tube from the nipple at the blower motor housing, pull out the blower motor wire harness from the grip under the hood and separate the blower motor wire harness connector from the heater-A/C housing wire harness. Unscrew the three screws connecting the blower motor and wheel to the heater-A/C housing, lower the assembly and remove the cover. Order is important: remove the clip retainer, then take the wheel off the blower motor shaft. When just the blower motor wheel is being put on, join the hub and the shaft so that the flat on the shaft lines up with the flat in the hub, insert the retainer clip over the hub, ensuring that its ears fit into the hub's and shaft's flats. Put the blower motor seal into place on the motor housing, then insert the blower motor and wheel assembly with the cover back into the heater-A/C housing using three mounting screws, tightened to 2.2 Nm (20 in. lbs.). Connect the blower motor wire harness to the heater-A/C housing wire harness, secure both wire harnesses into a retainer, attach the blower motor cooling tube to the blower motor housing nipple and link the negative battery connector back.