How to Maintain and Fix an Engine Mount on 2000 Dodge Ram 3500?

First, detach the negative battery cable and maneuver the fan clear of the radiator top tank and hose so that you do not raise the engine using the intake manifold. Put the engine support in place and lift the whole vehicle with a hoist. Rise the engine up enough to remove the through-bolt and nut, then take out the bolts holding the engine support bracket/cushion and finally lift out the support bracket/cushion and heat shields. For assembly, with the engine a bit up, added the support bracket/cushion and protective shields to the block and bolted them back down, ensuring all new bolts are tightened to 81 Nm (60 ft. lbs.). After that, fix the thru-bolt through the engine support bracket or cushion, lower the engine with the support fixture as you guide the engine bracket into the support cushion and then install the nuts, setting the tension to 102 Nm (75 ft. lbs.). In the end, drive the vehicle to the ground and remove the lifting fixture.

OEM 2000 Dodge Ram 3500 Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Engine Mounts found

View related parts
2000 Dodge Ram 3500 Motor Mount Part Number: 52021490AC
$416.86 MSRP: $548.00
You Save: $131.14 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Bracket; Mount; Insulator Engine Mount
- Replaces: 52021490AB
- Item Weight: 10.20 Pounds
- Item Dimensions: 6.6 x 6.2 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021490AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 3500 Submodels:
- Base | 6 Cyl 5.9 L DIESEL
View related parts
2000 Dodge Ram 3500 Motor Mount, Driver Side Part Number: 52018235AB
$72.15 MSRP: $119.00
You Save: $46.85 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Left; Engine Mount Bracket; Front Mount; Mount; Insulator Engine Mount
- Position: Driver Side
- Item Weight: 6.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52018235AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 3500 Rear Mount Part Number: 52058218
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Bracket; Motor Mount; Mount; Insulator Engine Mount Rear Transmission Support; Insulator Engine Mount
- Item Weight: 4.70 Pounds
- Item Dimensions: 9.0 x 3.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52058218
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 3500 Motor Mount Part Number: 52021491AC
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Bracket; Mount; Insulator Engine Mount
- Replaces: 52021491AB
- Item Weight: 10.40 Pounds
- Item Dimensions: 7.9 x 6.2 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021491AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 3500 Submodels:
- Base | 6 Cyl 5.9 L DIESEL
View related parts
2000 Dodge Ram 3500 Motor Mount Part Number: 52020327AB
Product Specifications
- Other Name: Insulator; Engine Mount Bracket; Front Mount; Insulator Engine Mount
- Item Weight: 6.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52020327AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Ram 3500 Submodels:
- Base | 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 3500 Motor Mount Part Number: 52020326AB
Product Specifications
- Other Name: Insulator Engine Mount; Engine Mount Bracket; Front Mount
- Item Weight: 6.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52020326AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Ram 3500 Submodels:
- Base | 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 3500 Motor Mount, Passenger Side Part Number: 52058804AB
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Right; Engine Mount Bracket; Front Mount; Mount; Insulator Engine Mount
- Position: Passenger Side
- Item Weight: 6.70 Pounds
- Item Dimensions: 8.6 x 5.0 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52058804AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 3500 Rear Mount Part Number: 52020251AA
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Bracket; Motor Mount; Mount; Insulator Engine Mount Rear Transmission Support; Insulator Engine Mount
- Item Weight: 3.30 Pounds
- Item Dimensions: 8.9 x 3.0 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52020251AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS

2000 Dodge Ram 3500 Engine Mount Parts and Q&A

Q: How to Maintain and Fix an Engine Mount on 2000 Dodge Ram 3500?
A: First, detach the negative battery cable and maneuver the fan clear of the radiator top tank and hose so that you do not raise the engine using the intake manifold. Put the engine support in place and lift the whole vehicle with a hoist. Rise the engine up enough to remove the through-bolt and nut, then take out the bolts holding the engine support bracket/cushion and finally lift out the support bracket/cushion and heat shields. For assembly, with the engine a bit up, added the support bracket/cushion and protective shields to the block and bolted them back down, ensuring all new bolts are tightened to 81 Nm (60 ft. lbs.). After that, fix the thru-bolt through the engine support bracket or cushion, lower the engine with the support fixture as you guide the engine bracket into the support cushion and then install the nuts, setting the tension to 102 Nm (75 ft. lbs.). In the end, drive the vehicle to the ground and remove the lifting fixture.