OEM 2000 Dodge Viper Window Regulator

2000 Dodge Viper Window Regulator Parts and Q&A

• Q: How to Maintain a Front Door Power Window Regulator on 2000 Dodge Viper?

  A: Opening up your car's front door, lift the trim panel and remove the inner rubber weather strip. Then, lift the door glass and remove the regulator from inside. Remove the wire from the window motor and once done, unscrew the brackets that keep the window regulator on the inner door panel. After that, remove the nut that holds the window regulator to the door's bottom and the screws that connect the power window motor to the inner panel. Following this, pull out the window regulator and motor from the door. Install the motor and regulator in the door and then tighten the nuts that hold the motor in place on the metal inside the door and position the bottom nut for the regulator in the door. Install the door glass again and join up the wire connector to the window motor. Fix the weather strip where the inner belt meets the car, operate the door glass, adjust it if it sticks and fit back the door trim panel.