How to Maintain and Fix a Door Hinge on 2000 Dodge Viper?

The first step to maintain the hinge on your front door is to open the door after unlocking the latch and then remove the door hinge cover. Place a lifting device behind the door and mark where the door hinge will be fitted with the help of a handy marking device. Then, remove both bolts from the hinge pillar and from the door's shutting side. After that, pull the door hinge from the vehicle. To install, attach the hinge again on the car and put loosened bolts on the pillar and door shut face temporarily. Adjust the hinge over the hinge pillar marks and screw the bolts into place and repeat this for the door hinge and bolts on the door shut face. Make sure the doors are correctly aligned and fix them if they aren't before checking and adjusting their operation. After that, screw on the door hinge cover.

OEM 2000 Dodge Viper Door Hinge

Interior Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Door Hinges found

View related parts
2000 Dodge Viper Hinge, Front Part Number: 5245109
Product Specifications
- Other Name: Hinge - Front Door; Door Hinge; Hinge Front Door; Hinge, Door
- Position: Front
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.3 x 5.3 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5245109
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, Base, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
2000 Dodge Viper Hinge Part Number: 4763965
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge; Hinge, Liftgate; Hinge Liftgate
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.5 x 4.0 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4763965
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, GT2, GTS | 10 Cyl 8.0 L GAS
View related parts
2000 Dodge Viper Hinge Part Number: 4763964
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge; Hinge, Liftgate; Hinge Liftgate
- Item Weight: 1.40 Pounds
- Item Dimensions: 10.8 x 3.8 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4763964
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, GT2, GTS | 10 Cyl 8.0 L GAS
View related parts
2000 Dodge Viper Hinge Part Number: 4643062
Product Specifications
- Other Name: Hinge - Deck Lid; Door Hinge; Hinge Assembly; Hinge Deck Lid
- Item Weight: 1.40 Pounds
- Item Dimensions: 5.6 x 4.8 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4643062
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, Base, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS

2000 Dodge Viper Door Hinge Parts and Q&A

Q: How to Maintain and Fix a Door Hinge on 2000 Dodge Viper?
A: The first step to maintain the hinge on your front door is to open the door after unlocking the latch and then remove the door hinge cover. Place a lifting device behind the door and mark where the door hinge will be fitted with the help of a handy marking device. Then, remove both bolts from the hinge pillar and from the door's shutting side. After that, pull the door hinge from the vehicle. To install, attach the hinge again on the car and put loosened bolts on the pillar and door shut face temporarily. Adjust the hinge over the hinge pillar marks and screw the bolts into place and repeat this for the door hinge and bolts on the door shut face. Make sure the doors are correctly aligned and fix them if they aren't before checking and adjusting their operation. After that, screw on the door hinge cover.