How to Service and Repair a Brake Light Switch on 2000 Jeep Cherokee?

The brake light switch can be serviced by removing the steering column cover and lower trim panel. Push the brake pedal, switch it 30° deg counter clockwise and disconnect the harness. Installation To install, lengthen plunger, add harness, position switch, turn 30° clockwise to secure. Do not overload the pull on the pedal more than 20 lbs.

OEM 2000 Jeep Cherokee Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2000 Jeep Cherokee Brake Switch Part Number: 4671336AD
$39.68 MSRP: $53.75
You Save: $14.07 (27%)
ADD TO CART
Product Specifications
- Other Name: Switch - Stop Lamp; Brake Light Switch; Stop Light Switch; Brake Pedal Switch; Lamp Switch; Release Switch; Stoplamp Switch; Switch; Switch Stop Lamp
- Replaces: 4671336, 4671336AC, 4671336AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.6 x 2.0 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4671336AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- Classic, Country, Limited, SE, Sport | 2.5L L4, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS

2000 Jeep Cherokee Brake Light Switch Parts and Q&A

Q: How to Service and Repair a Brake Light Switch on 2000 Jeep Cherokee?
A: The brake light switch can be serviced by removing the steering column cover and lower trim panel. Push the brake pedal, switch it 30° deg counter clockwise and disconnect the harness. Installation To install, lengthen plunger, add harness, position switch, turn 30° clockwise to secure. Do not overload the pull on the pedal more than 20 lbs.