How to Service and Repair a Wiper Switch on 2000 Jeep Cherokee?

In order to service the wiper switch, disconnect the battery negative cable. For the front switch, remove the knee blocker and lowering steering column shroud, and then remove the switch water shield and bracket. Unplug the switch and reverse the steps for installation. For the rear switch - remove the accessory bezel and unplug connectors before installing again.

OEM 2000 Jeep Cherokee Wiper Switch

Windshield Wiper Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Switches found

View related parts
2000 Jeep Cherokee Rear Wiper Switch Part Number: 56007249
Product Specifications
- Other Name: Switch - Windshield Wiper; Back Glass Wiper Switch; Windshield Washer Switch; Front Wiper Switch; Switch; Switch Windshield Wiper
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.5 x 2.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56007249
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2000 Jeep Cherokee Turn Signal Switch Part Number: 56010315AA
Product Specifications
- Other Name: Switch - Multifunction; Multi Purpose Switch; Signal Switch; Multifunction Left Stalk for Interior/Exterior Lights & Turn Signal Controls.
- Item Weight: 0.80 Pounds
- Item Dimensions: 4.0 x 5.5 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56010315AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2000 Jeep Cherokee Wiper Switch Parts and Q&A

Q: How to Service and Repair a Wiper Switch on 2000 Jeep Cherokee?
A: In order to service the wiper switch, disconnect the battery negative cable. For the front switch, remove the knee blocker and lowering steering column shroud, and then remove the switch water shield and bracket. Unplug the switch and reverse the steps for installation. For the rear switch - remove the accessory bezel and unplug connectors before installing again.