OEM 2000 Jeep Grand Cherokee Blower Motor

2000 Jeep Grand Cherokee Blower Motor Parts and Q&A

• Q: How to Maintain a Blower Motor on 2000 Jeep Grand Cherokee?

  A: Start by disconnecting the battery's negative terminal when working on the blower motor. Then, holding the retainer, remove the blower motor wire harness from the heater-A/C blower motor. Once you've loosened the three T-25 Torx head or flat-bladed screws that keep the blower motor and wheel attached to the heater-A/C housing, gently lower the motor and wheel from the housing. Detach the wheel retainer clip and get the blower wheel off the shaft it is attached to. Put the blower wheel's hub over the motor shaft and make sure the flats match before you squeeze the wheel onto the shaft. Slide the clip over the blower's hub, insert the motor and tighten the three screws to 2.2 Nm (20 in. lbs.). Connect the blower motor wire harness to the blower motor socket lastly and link the battery negative cable once again.