What Are A/C Compressor Cut-Out Switches and How to Service Them on 2000 Jeep Grand Cherokee?

This disconnection and unscrewing are necessary to service the high pressure sensor/switch and remove the wire harness and battery negative cable. Take out the switch and get rid of the O-ring. Lubricate a new O-ring with refrigerant oil, then fit it on, then reconnect the switch and wire harness, then reconnect the battery.

OEM 2000 Jeep Grand Cherokee A/C Compressor Cut-Out Switches

HVAC Cut-Out Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 A/C Compressor Cut-Out Switches found

View related parts
2000 Jeep Grand Cherokee Pressure Switch Part Number: 4897617AA
Product Specifications
- Other Name: Switch - A/C High Pressure Cut Off; HVAC Pressure Switch; A/C Compressor Cut-Out; Trinary Switch.; Lower Pressure Cut-Off Switch; High Pressure Cut-Off Switch; Switch; Switch A/C High Pressure Cut Off
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 1.1 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4897617AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Grand Cherokee Submodels:
- 5.9 Limited, Laredo, Limited, Orvis, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Jeep Grand Cherokee Clutch Cycling Switch Part Number: 4897613AB
Product Specifications
- Other Name: Switch - A/C Cycling; A/C Compressor Cut-Out Switch; HVAC Pressure Switch; A/C Trinary Switch; Switch
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.1 x 0.9 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4897613AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Grand Cherokee Submodels:
- Laredo, Limited | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2000 Jeep Grand Cherokee A/C Compressor Cut-Out Switches Parts and Q&A

Q: What Are A/C Compressor Cut-Out Switches and How to Service Them on 2000 Jeep Grand Cherokee?
A: This disconnection and unscrewing are necessary to service the high pressure sensor/switch and remove the wire harness and battery negative cable. Take out the switch and get rid of the O-ring. Lubricate a new O-ring with refrigerant oil, then fit it on, then reconnect the switch and wire harness, then reconnect the battery.