Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2000 Jeep Grand Cherokee Harmonic Balancer

Engine Harmonic Balancer
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Harmonic Balancers found

  • 2000 Jeep Grand Cherokee Harmonic Balancer - 53020689AB
    2000 Jeep Grand Cherokee Harmonic Balancer - 53020689AB
    2000 Jeep Grand Cherokee Harmonic Balancer - 53020689AB
    2000 Jeep Grand Cherokee Harmonic Balancer Diagram - 53020689AB
    View related parts

    2000 Jeep Grand Cherokee Vibration Damper Part Number: 53020689AB

    Product Specifications
    • Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Pulley; Damper Crankshaft
    • Item Weight: 10.90 Pounds
    • Item Dimensions: 10.5 x 10.4 x 6.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 53020689AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2000 Jeep Grand Cherokee Submodels:
    • 65th Anniversary Edition, Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
  • 2000 Jeep Grand Cherokee Harmonic Balancer - 33002920
    2000 Jeep Grand Cherokee Harmonic Balancer Diagram - 33002920
    View related parts

    2000 Jeep Grand Cherokee Vibration Damper Part Number: 33002920

    Product Specifications
    • Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Damper; Damper Crankshaft; Damper, Vibration; Damper/Pulley
    • Item Weight: 8.30 Pounds
    • Item Dimensions: 8.3 x 8.3 x 4.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 33002920
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2000 Jeep Grand Cherokee Submodels:
    • Base, Laredo, Limited, Orvis, SE, TSi | 6 Cyl 4.0 L GAS

2000 Jeep Grand Cherokee Harmonic Balancer Parts and Q&A

  • Q: How to Maintain and Fix a Harmonic Balancer and Crankshaft Pulley on 2000 Jeep Grand Cherokee?
    A: First, you should disconnect the negative battery cable before servicing and repairing the harmonic balancer and crankshaft pulley. Unbuckle the serpentine drive belt and the fan shroud and then soften and wiggle the retaining bolt out along with the damper washer. To take off the damper, apply Vibration Damper Removal Tool 7697 to its connection with the crankshaft. Prior to installation, put Mopar Silicone Rubber Adhesive Sealant in the keyway of the crankshaft, then insert the tube key. Combine the crankshaft key and keyway on the vibration damper hub and gently tap the damper onto the crankshaft. Put the vibration damper retaining bolt and the washer in place and fasten it so the torque measures 108 Nm (80 ft. lbs.). After that, replace the serpentine drive belt and secure the negative cable to the battery again.

Related 2000 Jeep Grand Cherokee Parts

Alternate Year Models

+
1999 Jeep Grand Cherokee Harmonic Balancer 2001 Jeep Grand Cherokee Harmonic Balancer