How to Remove and Install a MAP Sensor on 2000 Jeep Grand Cherokee?

Keep in mind that the MAP sensor is located by the throttle body and is connected through a short rubber link. Before removing the MAP sensor, take off the air cleaner duct and air resonator box at the end of the intake manifold. Then, unscrew the two bolts found at the MAP sensor's mount and, as you do that, detach the rubber L-shaped fitting by sliding it off both the throttle body and the sensor. When placing the part, connect the rubber L-shaped fitting to the MAP sensor, place the sensor against the throttle body and slide the rubber over the nipple and tighten the bolts to 3 Nm (25 in. lbs.). Lastly, put in place the air cleaner duct and air box.

OEM 2000 Jeep Grand Cherokee MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2000 Jeep Grand Cherokee M.A.P. Sensor Part Number: 56041018
$169.95 MSRP: $253.00
You Save: $83.05 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041018
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Grand Cherokee Submodels:
- Laredo, Limited | 8 Cyl 4.7 L GAS
View related parts
2000 Jeep Grand Cherokee M.A.P. Sensor Part Number: 56029405
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map See Note; Sensor Map; Pressure Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.8 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029405
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Grand Cherokee Submodels:
- 5.9 Limited, Laredo, Limited, Orvis, Overland, Sport, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Jeep Grand Cherokee MAP Sensor Parts and Q&A

Q: How to Remove and Install a MAP Sensor on 2000 Jeep Grand Cherokee?
A: Keep in mind that the MAP sensor is located by the throttle body and is connected through a short rubber link. Before removing the MAP sensor, take off the air cleaner duct and air resonator box at the end of the intake manifold. Then, unscrew the two bolts found at the MAP sensor's mount and, as you do that, detach the rubber L-shaped fitting by sliding it off both the throttle body and the sensor. When placing the part, connect the rubber L-shaped fitting to the MAP sensor, place the sensor against the throttle body and slide the rubber over the nipple and tighten the bolts to 3 Nm (25 in. lbs.). Lastly, put in place the air cleaner duct and air box.