How to Remove and Install a MAP Sensor on the Throttle Body on 2001 Jeep Grand Cherokee?

The MAP sensor attaches to the side wall of the throttle body and connects with the help of an L-shaped rubber fitting. Before you remove the sensor, you need to first take off the air cleaner duct and air resonator box at the throttle body. Following that, remove the bolt connections for the MAP sensor mount. To take out the MAP sensor, slide the rubber L-shaped fitting off the throttle body and then take the MAP sensor out. Before installation, attach the rubber L-shaped fitting to the MAP sensor, place the sensor over the throttle body, follow the fitting over the nipple and attach the mounting bolts after tightening them to 3 Nm (25 in. Lbs.). Install the air cleaner duct and air box as the last step.

OEM 2001 Jeep Grand Cherokee MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2001 Jeep Grand Cherokee M.A.P. Sensor Part Number: 56041018
$169.95 MSRP: $253.00
You Save: $83.05 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041018
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Grand Cherokee Submodels:
- Laredo, Limited | 8 Cyl 4.7 L GAS
View related parts
2001 Jeep Grand Cherokee M.A.P. Sensor Part Number: 56029405
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map See Note; Sensor Map; Pressure Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.8 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029405
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Grand Cherokee Submodels:
- 5.9 Limited, Laredo, Limited, Orvis, Overland, Sport, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2001 Jeep Grand Cherokee MAP Sensor Parts and Q&A

Q: How to Remove and Install a MAP Sensor on the Throttle Body on 2001 Jeep Grand Cherokee?
A: The MAP sensor attaches to the side wall of the throttle body and connects with the help of an L-shaped rubber fitting. Before you remove the sensor, you need to first take off the air cleaner duct and air resonator box at the throttle body. Following that, remove the bolt connections for the MAP sensor mount. To take out the MAP sensor, slide the rubber L-shaped fitting off the throttle body and then take the MAP sensor out. Before installation, attach the rubber L-shaped fitting to the MAP sensor, place the sensor over the throttle body, follow the fitting over the nipple and attach the mounting bolts after tightening them to 3 Nm (25 in. Lbs.). Install the air cleaner duct and air box as the last step.