How to Remove and Install a Throttle Position Sensor (TPS) on 2000 Jeep Grand Cherokee?

In order to install the Throttle Position Sensor (TPS), unscrew the mounting screws and unconnect the electrical connector, and remove it. To install, make sure that the throttle shaft slots in the TPS socket but it can turn a little. Install the screws to 7 Nm, connect electrical connector again and ensure it is not bound before starting the engine.

OEM 2000 Jeep Grand Cherokee Throttle Position Sensor

TPS Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Throttle Position Sensors found

View related parts
2000 Jeep Grand Cherokee Throttle Position Sensor Part Number: 68433984AA
$102.36 MSRP: $156.00
You Save: $53.64 (35%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Throttle Position; Throttle Positionition Sensor; Throttle Sensor
- Replaces: 4874371AC
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 2.6 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68433984AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Grand Cherokee Submodels:
- Laredo, Limited | 4.0L V6, 6 Cyl 4.0 L GAS
View related parts
2000 Jeep Grand Cherokee Throttle Position Sensor Part Number: 5017479AA
Product Specifications
- Other Name: Sensor - Throttle Position; Throttle Positionition Sensor; Throttle Sensor; Sensor Kit Throttle Position
- Replaces: 4882219
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.9 x 2.7 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5017479AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Grand Cherokee Submodels:
- 5.9 Limited, 65th Anniversary Edition, Laredo, Limited, Orvis, Overland, Special Edition, Sport, TSi | 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Jeep Grand Cherokee Throttle Position Sensor Parts and Q&A

Q: How to Remove and Install a Throttle Position Sensor (TPS) on 2000 Jeep Grand Cherokee?
A: In order to install the Throttle Position Sensor (TPS), unscrew the mounting screws and unconnect the electrical connector, and remove it. To install, make sure that the throttle shaft slots in the TPS socket but it can turn a little. Install the screws to 7 Nm, connect electrical connector again and ensure it is not bound before starting the engine.