How to replace the Wiper Motor and Wiper Pivot in a windshield wiper system on 2000 Jeep Grand Cherokee?

In order to change the windshield wiper motor, remove the battery negative cable first. Take off the wiper arms, cowl grille cover and disconnect the washer supply hose. Disassemble the wiper motor module, install the new module and re-connect the washer hose and re-install the cowl cover and the wiper arms.

OEM 2000 Jeep Grand Cherokee Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Motors found

View related parts
2000 Jeep Grand Cherokee Wiper Motor Part Number: 55155122AC
Product Specifications
- Other Name: Motor - Wiper; Back Glass Wiper Motor; Rear Motor
- Item Weight: 2.80 Pounds
- Item Dimensions: 7.0 x 6.8 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55155122AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Grand Cherokee Submodels:
- Laredo, Limited | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2000 Jeep Grand Cherokee Wiper Motor Assembly Part Number: 55155092AE
Product Specifications
- Other Name: Pivot - Wiper; Windshield Wiper Motor; Wiper Motor; Front Motor
- Replaces: 55155092AB, 55155092AC, 55155092AD
- Item Weight: 9.00 Pounds
- Item Dimensions: 33.2 x 8.2 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55155092AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2000 Jeep Grand Cherokee Wiper Motor Parts and Q&A

Q: How to replace the Wiper Motor and Wiper Pivot in a windshield wiper system on 2000 Jeep Grand Cherokee?
A: In order to change the windshield wiper motor, remove the battery negative cable first. Take off the wiper arms, cowl grille cover and disconnect the washer supply hose. Disassemble the wiper motor module, install the new module and re-connect the washer hose and re-install the cowl cover and the wiper arms.