How to Maintain an Ambient Temperature Sensor on 2001 Chrysler LHS?

The first thing you should do is first lift the hood and remove the negative battery cable from the remote battery terminal. Provide below-vehicle support using safety stands. Following this, take out the capacitor from behind the front bumper cover and unplug the ambient temperature sensor wire. For installation, attach the ambient temperature sensor electrical connector, add the sensor's retaining screw and tighten it to 2.2 Nm (20 in. lbs.). After that, attach the negative battery cable once again.

OEM 2001 Chrysler LHS Ambient Temperature Sensor

Inside Outside Auto Thermometer Gauge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ambient Temperature Sensor found

View related parts
2001 Chrysler LHS Temperature Sensor, Front Part Number: 68518243AA
$47.14 MSRP: $69.85
You Save: $22.71 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Ambient Temperature; Air Temp, Front; Battery Temp; Coolant Temp.; Ambient Temperature Sensor; Air Temperature Sensor; Temperature Sending Unit; Sentinel Sensor
- Position: Front
- Replaces: 5149025AA, 5149265AB, 56042395
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.2 x 2.0 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68518243AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler LHS Submodels:
- Base | 3.5L V6, 6 Cyl 3.5 L GAS

2001 Chrysler LHS Ambient Temperature Sensor Parts and Q&A

Q: How to Maintain an Ambient Temperature Sensor on 2001 Chrysler LHS?
A: The first thing you should do is first lift the hood and remove the negative battery cable from the remote battery terminal. Provide below-vehicle support using safety stands. Following this, take out the capacitor from behind the front bumper cover and unplug the ambient temperature sensor wire. For installation, attach the ambient temperature sensor electrical connector, add the sensor's retaining screw and tighten it to 2.2 Nm (20 in. lbs.). After that, attach the negative battery cable once again.