Is Brake Disc Refacing Necessary with Every Brake Pad Replacement on 2001 Chrysler Sebring?

Every time you replace brake pads, you might not need to replace the brake disc, but it's necessary if required. A lot of care must be taken during any disc service to guarantee the proper function of the brakes. For discs with noticeable, deep or uneven score marks, a warped surface or problems with brake harshness or pulsation, it is necessary to either use a hub-mounted on-car brake lathe to reface or replace them. For good results, running the brake disc on the hub-mounted brake lathe is recommended, because it trues the disc to the car's bearing and hub. On all discs, markings for minimum allowable thickness are put on an area that has not been machined, telling us the least amount the disc can be turned down. The minimum thickness for the disc must be respected at all times. Clean the brake disc face and any hub adapters before you start the installation. When brake lathe is used, read the manufacturer's directions carefully and work on both sides of the disc at one time to prevent a tapered or uneven brake disc surface.

OEM 2001 Chrysler Sebring Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Discs found

View related parts
2001 Chrysler Sebring Brake Rotor, Front Part Number: 4879138AE
$27.35 MSRP: $180.00
You Save: $152.65 (85%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Disc Brake Rotor; Rotor
- Position: Front
- Replaces: 4879228AA, 4879138AA, 4879138AC
- Item Weight: 15.20 Pounds
- Item Dimensions: 11.5 x 11.2 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4879138AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Chrysler Sebring Rotor, Rear Part Number: 5085651AD
$114.21 MSRP: $174.00
You Save: $59.79 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Disc Brake Rotor; Brake Rotor; Brake Disc
- Position: Rear
- Replaces: 5085651AB, 5085651AA, 5085650AA
- Item Weight: 9.80 Pounds
- Item Dimensions: 10.7 x 11.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5085651AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Chrysler Sebring ABS Ring, Rear Passenger Side Part Number: MR249451
Product Specifications
- Other Name: Rotor - Brake; ABS Wheel Speed Sensor Tone Ring, Rear Left, Rear Right; ABS Tone Ring; Sensor Ring; ABS Rotor; Rear Wheel Hub Brake Control, FWD After 6-1-96.
- Position: Rear Passenger Side
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR249451
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Chrysler Sebring Rotor, Rear Part Number: MB928716
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Disc, Rear Brake; Rotor Brake; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Item Weight: 10.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MB928716
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Sebring Submodels:
- Base, LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Chrysler Sebring Rotor, Front Part Number: 4615A069
Product Specifications
- Other Name: Rotor - Front Brake; Disc Brake Rotor, Front
- Position: Front
- Replaces: 4615A054, MR493551
- Item Weight: 13.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4615A069
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Sebring Submodels:
- Base, LX, LXi, Limited | 3.0L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Chrysler Sebring Rotor, Front Part Number: MR955127
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake; Brake Rotor
- Position: Front
- Item Weight: 12.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: MR955127
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Sebring Submodels:
- Base, LX | 4 Cyl 2.4 L GAS
View related parts
2001 Chrysler Sebring Rotor, Front Part Number: MR389724
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Rotor Brake
- Position: Front
- Item Weight: 12.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR389724
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Sebring Submodels:
- LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS

2001 Chrysler Sebring Brake Disc Parts and Q&A

Q: Is Brake Disc Refacing Necessary with Every Brake Pad Replacement on 2001 Chrysler Sebring?
A: Every time you replace brake pads, you might not need to replace the brake disc, but it's necessary if required. A lot of care must be taken during any disc service to guarantee the proper function of the brakes. For discs with noticeable, deep or uneven score marks, a warped surface or problems with brake harshness or pulsation, it is necessary to either use a hub-mounted on-car brake lathe to reface or replace them. For good results, running the brake disc on the hub-mounted brake lathe is recommended, because it trues the disc to the car's bearing and hub. On all discs, markings for minimum allowable thickness are put on an area that has not been machined, telling us the least amount the disc can be turned down. The minimum thickness for the disc must be respected at all times. Clean the brake disc face and any hub adapters before you start the installation. When brake lathe is used, read the manufacturer's directions carefully and work on both sides of the disc at one time to prevent a tapered or uneven brake disc surface.