How to Remove and Replace a Front Brake Disc on Chrysler Sebring?

Bring the vehicle up on safety jack stands to remove and replace the front brake rotor. After that, take out the wheel mounting nuts and then get rid of the tire and wheel. Sometimes, a slight retraction of the caliper, followed by working the guide pins on the inward side, can help you easily get the caliper off the knuckle. Once done, use a wrench to take off the two bolts that hold the disc brake caliper and adapter bracket to the steering knuckle. Slowly remove the caliper and adapter bracket from the knuckle and rotor together, then use some wire or a bungee cord to keep it hanging off to the side without pulling the brake hose too tight. Push the brake rotor off the hub and bearing in your last step.

How to Service the Front Brake Disc on Chrysler Sebring?

The first step to servicing the front brake disc is to lift the vehicle, take off the tire and remove the wheel. Pull the caliper toward the left wheel to push the caliper piston inside, then loosen and remove both bolts joining the caliper adapter to the steering knuckle. Take off the brake caliper and adapter arm as one, hanging it on a wire or bungee cord some distance from the wheel, as long as the brake hose is not stretched far from the mounting point. After that, remove the clips holding the brake disc to the wheel studs and set the disc aside. Put the new disc over the hub's studs and bolt the disc brake caliper assembly over the disc. Secure your caliper adapter onto the steering knuckle using the bolts, then tighten them to 80 Nm (60 ft. lbs.). Install the tire and wheel assembly and tighten the wheel mounting nuts to a torque of 135 Nm (100 ft. lbs.). After that, lower the vehicle. Several times pump the brake pedal to help the shoes fit to the disc before you begin road testing and stopping the vehicle.

OEM Chrysler Sebring Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Brake Discs found

View related parts
Chrysler Sebring Brake Rotor, Front Part Number: 4879138AE
$27.35 MSRP: $180.00
You Save: $152.65 (85%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Disc Brake Rotor; Rotor
- Position: Front
- Replaces: 4879228AA, 4879138AA, 4879138AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Rotor, Rear Part Number: 5085651AD
$114.21 MSRP: $174.00
You Save: $59.79 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Disc Brake Rotor; Brake Rotor; Brake Disc
- Position: Rear
- Replaces: 5085651AB, 5085651AA, 5085650AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2006 Chrysler Sebring | 2.4L L4, 2.7L V6
- 1996-1998 Chrysler Sebring
View related parts
Chrysler Sebring Rotor, Rear Part Number: 5105515AA
$77.99 MSRP: $117.00
You Save: $39.01 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Rotor Brake; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Rotor, Front Part Number: 5105514AA
$83.79 MSRP: $126.00
You Save: $42.21 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Brake Rotor Part Number: 4879229AB
$79.68 MSRP: $173.00
You Save: $93.32 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Hardware Kit; Rotor
- Replaces: 4879229AA, 4616935AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | JX, JXi | 2.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring ABS Ring, Rear Passenger Side Part Number: MR249451
Product Specifications
- Other Name: Rotor - Brake; ABS Wheel Speed Sensor Tone Ring, Rear Left, Rear Right; ABS Tone Ring; Sensor Ring; ABS Rotor; Rear Wheel Hub Brake Control, FWD After 6-1-96.
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2005 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Rotor, Rear Part Number: MB928716
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Disc, Rear Brake; Rotor Brake; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chrysler Sebring | Base, LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Rotor, Front Part Number: 4615A069
Product Specifications
- Other Name: Rotor - Front Brake; Disc Brake Rotor, Front
- Position: Front
- Replaces: 4615A054, MR493551
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX, LXi, Limited | 3.0L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Rotor, Front Part Number: MR955127
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake; Brake Rotor
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Rotor, Front Part Number: MR389724
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Rotor Brake
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2001 Chrysler Sebring | LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS

Chrysler Sebring Brake Disc

Choose OEM Brake Disc that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Brake Disc follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Brake Disc of Chrysler Sebring cars is part of the disc brake system that is fully responsible for the creation of the friction needed to stop the automobile. These discs are usually manufactured from gray iron though some of them are equipped with ventilation fins or vanes in order to improve heat dissipation, which in its turn affects braking. Through the duration, Chrysler has used both the solid and vented style of Brake Discs, with some using drilled or slotted styles for enhanced heat control and performance as well as noise reduction. Chrysler Sebring Brake Discs like any other car part is liable to wear and tear and some of the problems which users may face include warps, crack and rust. Done correctly and on a routine basis, immense advantages will be gained but when there is a defect, it may hamper the braking power. Machining used to be popular, but the slimmer formats that have become fashionable recently frequently require standard replacements. To improve the repair quality, it is advised to replace the Brake Discs in two per axle while strictly following the top-tier requirements for proper and smooth braking.

Chrysler Sebring Brake Disc Parts and Q&A

Rotor, Front
5105514AA
Q: How to Remove and Replace a Front Brake Disc on Chrysler Sebring?
A:
Bring the vehicle up on safety jack stands to remove and replace the front brake rotor. After that, take out the wheel mounting nuts and then get rid of the tire and wheel. Sometimes, a slight retraction of the caliper, followed by working the guide pins on the inward side, can help you easily get the caliper off the knuckle. Once done, use a wrench to take off the two bolts that hold the disc Brake Caliper and adapter bracket to the Steering Knuckle. Slowly remove the caliper and adapter bracket from the knuckle and rotor together, then use some wire or a bungee cord to keep it hanging off to the side without pulling the brake hose too tight. Push the brake rotor off the hub and bearing in your last step.
Brake Rotor, Front
4879138AE
Q: How to Service the Front Brake Disc on Chrysler Sebring?
A:
The first step to servicing the front brake disc is to lift the vehicle, take off the tire and remove the wheel. Pull the caliper toward the left wheel to push the caliper piston inside, then loosen and remove both bolts joining the caliper adapter to the Steering Knuckle. Take off the Brake Caliper and adapter arm as one, hanging it on a wire or bungee cord some distance from the wheel, as long as the brake hose is not stretched far from the mounting point. After that, remove the clips holding the brake disc to the wheel studs and set the disc aside. Put the new disc over the hub's studs and bolt the disc brake caliper assembly over the disc. Secure your caliper adapter onto the steering knuckle using the bolts, then tighten them to 80 Nm (60 ft. lbs.). Install the tire and wheel assembly and tighten the wheel mounting nuts to a torque of 135 Nm (100 ft. lbs.). After that, lower the vehicle. Several times pump the brake pedal to help the shoes fit to the disc before you begin road testing and stopping the vehicle.