How to Service the Power Window Switch in the Driver's Door Module on 2001 Dodge Dakota?

First, isolate and disconnect the battery's negative cable when working with the driver side power window switch in the Drive Door Module. place a trim stick from behind the door edge at the spot where the new switch will go and lift the switch bezel out. Take off the wire harness connector from the switch and disconnect it from the bezel. Start the installation by putting the switch into the bezel, then hook up the wire harness connector to it. Push the switch into the front of the door trim panel, then reconnect the battery's negative cable.

OEM 2001 Dodge Dakota Power Window Switch

Electric Window Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Power Window Switches found

View related parts
2001 Dodge Dakota Window Switch, Black, Front Passenger Side Part Number: 56007695AD
$100.22 MSRP: $220.00
You Save: $119.78 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Power Window; Door Window Switch, Front Right, Rear
- Position: Front Passenger Side
- Replaces: 5GS20DX9AA, 56007695AB, 56007695AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.0 x 2.3 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56007695AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Dakota Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport, Sport Plus | 2.5L L4, 3.7L V6, 3.9L V6, 4 Cyl 2.5 L GAS, 4.7L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Dakota Window Switch Part Number: 68193532AA
$143.89 MSRP: $214.00
You Save: $70.11 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Window And Door Lock
- Replaced by: 68193532AB
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.7 x 2.7 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68193532AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Dakota Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport, Sport Plus | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Dakota Window Switch, Front Passenger Side Part Number: 5GS19DX9AC
$28.20 MSRP: $41.70
You Save: $13.50 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Door Lock; Door Lock Switch, Front Right; Door Lock Switch; Lock Switch
- Position: Front Passenger Side
- Replaces: 5GS19DX9AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.0 x 3.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GS19DX9AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Dakota Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport, Sport Plus | 2.5L L4, 3.7L V6, 3.9L V6, 4 Cyl 2.5 L GAS, 4.7L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Dakota Window Switch Part Number: 68193532AB
Product Specifications
- Other Name: Switch - Window And Door Lock
- Replaces: 68193532AA
- Item Weight: 0.90 Pounds
- Item Dimensions: 8.8 x 2.7 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68193532AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Dakota Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport, Sport Plus | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

2001 Dodge Dakota Power Window Switch Parts and Q&A

Q: How to Service the Power Window Switch in the Driver's Door Module on 2001 Dodge Dakota?
A: First, isolate and disconnect the battery's negative cable when working with the driver side power window switch in the Drive Door Module. place a trim stick from behind the door edge at the spot where the new switch will go and lift the switch bezel out. Take off the wire harness connector from the switch and disconnect it from the bezel. Start the installation by putting the switch into the bezel, then hook up the wire harness connector to it. Push the switch into the front of the door trim panel, then reconnect the battery's negative cable.