How to Replace the Seat Heater Switch for the Driver's Seat on 2001 Dodge Durango?

To replace the driver heated seat switch, disconnect the battery negative cable. Use a pry tool to yank the switch out of the center console, unhook the wire harness and remove the switch. For installation, reconnect the wire harness, install the switch and reconnect the battery cable.

OEM 2001 Dodge Durango Seat Heater Switch

Seat Heater Level Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Heater Switches found

View related parts
2001 Dodge Durango Seat Switch, Passenger Side Part Number: 56045098AA
Product Specifications
- Other Name: Heated Seat; Seat Heater Switch, Right; Switch Heated Seat
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.8 x 2.7 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56045098AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Durango Seat Switch, Driver Side Part Number: 56045099AA
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch, Left; Switch Heated Seat
- Position: Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.8 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56045099AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

2001 Dodge Durango Seat Heater Switch Parts and Q&A

Q: How to Replace the Seat Heater Switch for the Driver's Seat on 2001 Dodge Durango?
A: To replace the driver heated seat switch, disconnect the battery negative cable. Use a pry tool to yank the switch out of the center console, unhook the wire harness and remove the switch. For installation, reconnect the wire harness, install the switch and reconnect the battery cable.