JeepParts
My Garage
My Account
Cart
OEM 2001 Dodge Durango Ignition Coil
Ignition Coil Resistor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Ignition Coils found
2001 Dodge Durango Ignition Coil Part Number: 56028172AC
$74.65 MSRP: $115.00You Save: $40.35 (36%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Coil/Ignition - Ignition; Coil
- Replaces: 56028172AB
- Item Weight: 1.40 Pounds
- Item Dimensions: 2.9 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028172AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Durango Ignition Coil Part Number: 56028138AF
$83.96 MSRP: $126.00You Save: $42.04 (34%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Ignition Coil Set; Coil Ignition
- Replaces: 56028138AD, 56028138AB, 56028138AE
- Item Weight: 0.90 Pounds
- Item Dimensions: 1.6 x 3.3 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028138AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Durango Ignition Coil Parts and Q&A
- Q: How to Remove and Install an Ignition Coil on an Engine Cylinder Head on 2001 Dodge Durango?A: The ignition coil, a positionally fixed epoxy filled type, is bolted to a bracket on the front of the right engine cylinder head above the automatic belt tensioner bracket. Disconnect the main lead from the ignition coil and then disconnect the spark plug cable, too. You should not take out the coil bracket-to-cylinder head bolts because they are under accessory drive belt tension; if you must remove them, all belt tension should be released first. When the ignition coil has been unplugged, remove it from the coil mounting bracket by loosening and removing two bolts. To install, join the ignition coil to its coil bracket. If nuts and bolts are involved, tighten them to 11 Nm (100 in. lbs.) torque. Otherwise, if the coil mounting bracket was tapped for mounting, tighten them to 5 Nm (50 in. lbs.) torque. Fully these all the connectors back to the ignition coil.
Related 2001 Dodge Durango Parts
2001 Dodge Durango Oxygen Sensor
2001 Dodge Durango MAP Sensor
2001 Dodge Durango Camshaft Position Sensor
2001 Dodge Durango Coolant Temperature Sensor
2001 Dodge Durango Ignition Switch
2001 Dodge Durango Distributor Cap
2001 Dodge Durango Distributor Rotor
2001 Dodge Durango Engine Control Module
2001 Dodge Durango Ignition Lock Assembly
2001 Dodge Durango Ignition Lock Cylinder
2001 Dodge Durango Intake Manifold Temperature Sensor
2001 Dodge Durango Seat Heater Switch