Other Name: Seat Belt - Front Center; Seat Belt Receptacle, Front, Front Center, Front Outer; Center Seat Belt; Buckle End; Latch; Seat Belt Front Center
Position: Front Center
Item Weight: 1.00 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: JX771T5AD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2001 Dodge Intrepid Submodels:
ES, Police, R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
Other Name: Seat Belt - Rear Outer; Seat Belt Lap and Shoulder Belt, Rear Right, Rear Right Outer; Lap & Shoulder Belt; Belt & Retractor; Seat Belt Rear Outer
Other Name: Seat Belt - Rear Outer; Seat Belt Lap and Shoulder Belt, Rear Left, Rear Left Outer; Lap & Shoulder Belt; Belt & Retractor; Seat Belt Rear Outer
Other Name: Seat Belt - Rear Outer; Seat Belt Lap and Shoulder Belt, Rear Left, Rear Left Outer; Lap & Shoulder Belt; Belt & Retractor; Seat Belt Rear Outer
Other Name: Seat Belt - Rear Outer; Seat Belt Lap and Shoulder Belt, Rear Left, Rear Left Outer; Lap & Shoulder Belt; Belt & Retractor; Seat Belt Rear Outer
Other Name: Seat Belt - Rear; Lap and Shoulder Belt, Rear Center; Lap and Shoulder Belt; Receptacle, Rear Left; Belt & Retractor; Center Seat Belt; Buckle End
Other Name: Seat Belt - Front Center; Seat Belt, Front Center, Front Center Left; Center Seat Belt; Seat Belt Front Center
Position: Front Center
Replaces: WR131L5AB
Item Weight: 1.00 Pounds
Item Dimensions: 5.3 x 7.1 x 2.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: WR131L5AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2001 Dodge Intrepid Submodels:
ES, R/T, SE | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
| Page 1 of 2 |Next >
1-20 of 34 Results
2001 Dodge Intrepid Seat Belt Parts and Q&A
Q: How to Maintain the Rear Center Seat Belt and Retractor on 2001 Dodge Intrepid?
A: To service the rear center seat belt, check the seat belt and replace retractor if it is damaged. Remove the rear shelf trim, remove the retractor bolt and remove the assembly. Reinstall it, torque the bolt to 40 Nm and check the seat belts are correctly installed and then reinstall the rear seat back.