How to service and repair the front engine mount on 2001 Dodge Ram 1500 Van?

Lift the hood and set up the fan to make sure that your hand will clear the top radiator tank and hose. Disconnect the negative battery cable and ensure you don't raise the engine by pulling the intake manifold. Place the engine lifting fixture on the chassis and hoist the car with a lift. Pull the nuts out of each bracket and insulator and then lift the engine with the support fixture high enough to slide out the insulators. When the engine mounting bracket was not there, insert it onto the cylinder block to its correct location and tighten all bolts to 88 Nm (65 ft. lbs.) torque. After raising the engine slightly, put in the insulators, then lower it back with the support while you guide the insulator studs into the holes in the crossmember and brackets. Apply torque of 102 Nm (75 ft. lbs.) to all attaching nuts, lower the car and at last take out the engine support fixture.

OEM 2001 Dodge Ram 1500 Van Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Engine Mounts found

View related parts
2001 Dodge Ram 1500 Van Rear Bracket Part Number: 52019760
$18.41 MSRP: $23.34
You Save: $4.93 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Transmission Crossmember; Motor Mount; Support; Support Engine Mount
- Item Weight: 9.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52019760
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Dodge Ram 1500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 1500 Van Mount Bracket, Driver Side Part Number: 52019627
$30.31 MSRP: $38.42
You Save: $8.11 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Motor Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Item Weight: 3.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52019627
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 1500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 1500 Van Front Support Part Number: 52021319AB
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Front Mount; Front Insulator; Mount; Insulator Engine Mount
- Item Weight: 1.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021319AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Dodge Ram 1500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS
View related parts
2001 Dodge Ram 1500 Van Motor Mount Part Number: 52019716AB
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount; Engine Mount Bracket; Front Mount; Front Insulator; Mount; Insulator Engine Mount
- Item Weight: 1.90 Pounds
- Item Dimensions: 4.2 x 3.5 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52019716AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 1500 Van Submodels:
- Base | 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 1500 Van Mount Bracket, Passenger Side Part Number: 52019626
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Motor Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52019626
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Dodge Ram 1500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 1500 Van Rear Mount Part Number: 52019615AC
Product Specifications
- Other Name: Insulator - Engine Mount; Support Bracket; Isolator, Rear; Torque Strut; Bracket; Motor Mount; Rear Insulator; Insulator Engine Mount
- Position: Rear
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.0 x 4.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52019615AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 1500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2001 Dodge Ram 1500 Van Engine Mount Parts and Q&A

Q: How to service and repair the front engine mount on 2001 Dodge Ram 1500 Van?
A: Lift the hood and set up the fan to make sure that your hand will clear the top radiator tank and hose. Disconnect the negative battery cable and ensure you don't raise the engine by pulling the intake manifold. Place the engine lifting fixture on the chassis and hoist the car with a lift. Pull the nuts out of each bracket and insulator and then lift the engine with the support fixture high enough to slide out the insulators. When the engine mounting bracket was not there, insert it onto the cylinder block to its correct location and tighten all bolts to 88 Nm (65 ft. lbs.) torque. After raising the engine slightly, put in the insulators, then lower it back with the support while you guide the insulator studs into the holes in the crossmember and brackets. Apply torque of 102 Nm (75 ft. lbs.) to all attaching nuts, lower the car and at last take out the engine support fixture.