How to Maintain and Fix a Door Lock Cylinder on 2001 Dodge Ram 2500?

Before servicing or repairing the door lock cylinder, take off the exterior door handle first. Then, get rid of the clip and pull out the lock cylinder lever and switch if you have one. Once that's done, loosen and remove the screw to remove the lock cylinder. Initially, insert the lock cylinder inside the door again and fasten it with the screw. Recovering from the earlier steps, connect the cylinder switch, lever and retaining clip and finish by reattaching the exterior handle.

OEM 2001 Dodge Ram 2500 Door Lock Cylinder

Door Lock Cylinder Tumbler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Door Lock Cylinder found

View related parts
2001 Dodge Ram 2500 Lock & Cylinder, Rear Part Number: 4778125
$68.94 MSRP: $102.00
You Save: $33.06 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Lock; Door Lock Cylinder, Front; Liftgate Lock, Rear; Lock Cylinder; Cylinder Lock Package for Door or Liftgate (Bright)
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.5 x 3.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4778125
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2001 Dodge Ram 2500 Door Lock Cylinder Parts and Q&A

Q: How to Maintain and Fix a Door Lock Cylinder on 2001 Dodge Ram 2500?
A: Before servicing or repairing the door lock cylinder, take off the exterior door handle first. Then, get rid of the clip and pull out the lock cylinder lever and switch if you have one. Once that's done, loosen and remove the screw to remove the lock cylinder. Initially, insert the lock cylinder inside the door again and fasten it with the screw. Recovering from the earlier steps, connect the cylinder switch, lever and retaining clip and finish by reattaching the exterior handle.