How to Maintain and Fix an Exhaust Pipe on 2001 Dodge Stratus?

Raise the car on a hoist, spray penetrating oil on the band clamp and fasteners of the resonator/pipe assembly and the exhaust system at the cross under pipe to loosen them. Pull out the strap that attaches the exhaust system to the ground and undo the band on the resonator/pipe. Be careful when taking off the rubber isolators and you may apply a bit of soap water or silicone spray if they are stuck, but do not use anything with petroleum. Then, take off the support isolators from the muffler mounting points and get rid of the tube assembly made up of the resonator and muffler in one piece. Disconnect the fasteners from the exhaust pipe and cross-under pipe and wiggle the pipe out. To install, join the exhaust pipe to the cross-under pipe and following that, loosely place the resonator/pipe and muffler/pipe assembly on the exhaust pipe. After installing the support isolators on the muffler supports, line up the pipe on top of the vehicle with the resonator/muffler assembly to make sure it does not hit any underbody parts and the support weight is the same on each isolator. Screw together the exhaust pipe's clamps with the cross-under pipe up to 28 Nm (250 inch lbs.) and clamp the resonator or pipe assembly with the band clamp to 54 Nm (40 ft. lbs.). After that, attach the ground strap to the muffler and lower the car.

OEM 2001 Dodge Stratus Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Exhaust Pipes found

View related parts
2001 Dodge Stratus Muffler & Pipe Part Number: 4764604AC
$80.07 MSRP: $145.00
You Save: $64.93 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Resonator; Muffler W/Tpipe; Muffler; Muffler And Tailpipe Exhaust
- Replaces: 4764604AB
- Item Weight: 18.30 Pounds
- Item Dimensions: 106.0 x 51.5 x 52.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4764604AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Stratus Submodels:
- ES, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS
View related parts
2001 Dodge Stratus Crossover Pipe Part Number: 4764644AE
Product Specifications
- Other Name: Pipe - Exhaust Crossunder; Exhaust Crossover Pipe; Exhaust Pipe; Direct-Fit Exhaust; Exhaust System Kit; Cross Over Pipe; Pipe Exhaust Crossunder
- Replaces: 4764644AD
- Item Weight: 10.00 Pounds
- Item Dimensions: 26.3 x 8.1 x 13.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4764644AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Stratus Submodels:
- ES, R/T, SE, SE Plus, SXT | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2001 Dodge Stratus Converter & Pipe, Front Part Number: MR552251
Product Specifications
- Other Name: Pipe - Exhaust Front; Catalytic Converter; Exhaust Pipe; Pipe Exhaust Front
- Position: Front
- Item Weight: 18.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR552251
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Stratus Submodels:
- SE | 4 Cyl 2.4 L GAS
View related parts
2001 Dodge Stratus Muffler W/Tpipe Part Number: MR450428
Product Specifications
- Other Name: Muffler; Exhaust Muffler; Exhaust Pipe; Resonator; Muffler Exhaust
- Item Weight: 21.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR450428
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Dodge Stratus Submodels:
- R/T, SE | 6 Cyl 3.0 L GAS
View related parts
2001 Dodge Stratus Intermediate Pipe Part Number: MR431955
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Intermediate Pipe; Exhaust Pipe; Intermed Pipe; Pipe Exhaust
- Item Weight: 20.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR431955
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Dodge Stratus Submodels:
- R/T, SE | 6 Cyl 3.0 L GAS
View related parts
2001 Dodge Stratus Intermediate Pipe Part Number: MR431953
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Intermediate Pipe; Exhaust Pipe; Intermed Pipe; Pipe Exhaust
- Item Weight: 18.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR431953
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Dodge Stratus Submodels:
- SE, SXT | 4 Cyl 2.4 L GAS
View related parts
2001 Dodge Stratus Catalytic Converter, Front Part Number: MR281020
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Crossover Pipe, Front; Exhaust Pipe; Front Pipe; Pipe Exhaust Front
- Position: Front
- Item Weight: 27.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR281020
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Stratus Submodels:
- R/T, SE | 6 Cyl 3.0 L GAS
View related parts
2001 Dodge Stratus Catalytic Converter, Rear Part Number: 4764646AB
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter, Rear; Converter; Converter Catalytic
- Position: Rear
- Item Weight: 7.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4764646AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Stratus Submodels:
- ES, SE | 6 Cyl 2.7 L GAS
View related parts
2001 Dodge Stratus Resonator & Pipe Part Number: 4764607AD
Product Specifications
- Other Name: Pipe - Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Resonator; Intermediate Pipe; Resonator W/Pipe; Pipe And Resonator Exhaust
- Replaces: 4764607AC
- Item Weight: 11.60 Pounds
- Item Dimensions: 74.2 x 18.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4764607AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Stratus Submodels:
- ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2001 Dodge Stratus Muffler & Pipe Part Number: 4578330AA
Product Specifications
- Other Name: Muffler - Exhaust; Direct-Fit Exhaust Assembly; Exhaust System Kit; Resonator; Muffler W/Tpipe; Muffler; Muffler And Tailpipe Exhaust
- Replaces: 4764606AB, 4764606AC, 4764606AD
- Item Weight: 19.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4578330AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Stratus Submodels:
- ES, R/T, SE, SE Plus, SXT | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2001 Dodge Stratus Exhaust Pipe Parts and Q&A

Q: How to Maintain and Fix an Exhaust Pipe on 2001 Dodge Stratus?
A: Raise the car on a hoist, spray penetrating oil on the band clamp and fasteners of the resonator/pipe assembly and the exhaust system at the cross under pipe to loosen them. Pull out the strap that attaches the exhaust system to the ground and undo the band on the resonator/pipe. Be careful when taking off the rubber isolators and you may apply a bit of soap water or silicone spray if they are stuck, but do not use anything with petroleum. Then, take off the support isolators from the muffler mounting points and get rid of the tube assembly made up of the resonator and muffler in one piece. Disconnect the fasteners from the exhaust pipe and cross-under pipe and wiggle the pipe out. To install, join the exhaust pipe to the cross-under pipe and following that, loosely place the resonator/pipe and muffler/pipe assembly on the exhaust pipe. After installing the support isolators on the muffler supports, line up the pipe on top of the vehicle with the resonator/muffler assembly to make sure it does not hit any underbody parts and the support weight is the same on each isolator. Screw together the exhaust pipe's clamps with the cross-under pipe up to 28 Nm (250 inch lbs.) and clamp the resonator or pipe assembly with the band clamp to 54 Nm (40 ft. lbs.). After that, attach the ground strap to the muffler and lower the car.