JeepParts
My Garage
My Account
Cart
OEM 2001 Jeep Wrangler Car Speakers
Audio Speakers- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Car Speakers found
2001 Jeep Wrangler Speaker Part Number: 56038609AC
Product Specifications- Other Name: Speaker - Sub Woofer; Speaker Sub Woofer
- Item Weight: 6.90 Pounds
- Item Dimensions: 25.8 x 13.7 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56038609AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Jeep Wrangler Rear Speaker Part Number: 56038566AB
Product Specifications- Other Name: Speaker; Speaker, Rear; Speaker 5.25"
- Position: Rear
- Item Weight: 1.50 Pounds
- Item Dimensions: 8.4 x 8.8 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56038566AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Product Specifications- Other Name: Speaker - Instrument Panel; Speaker, Front
- Position: Front
- Replaces: 56008795AB, 56008795, 56008795AC
- Item Weight: 1.70 Pounds
- Item Dimensions: 9.6 x 5.3 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56008795AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Jeep Wrangler Car Speakers Parts and Q&A
- Q: How to Replace Car Speakers While Ensuring the Airbag System is Disabled on 2001 Jeep Wrangler?A: First, unplug the air bag by disconnecting and isolating the battery negative cable. After that, wait for two minutes to let the depressurization of the air bag system capacitor prevent accidental deployment. First, get rid of the two screws that attach the speaker bezel at the outboard end to the instrument panel. Gently work around the top and bottom edges of the bezel with a wide flat tool, making sure you trigger and release the two snap clips holding it in place and then move the bezel away from the instrument panel. Following this, unscrew the four screws holding the speaker to the instrument panel armature and move the speaker far enough so that you can get to the speaker wire connector and unplug it. Connect the speaker wire connector to the speaker and then position the speaker against the instrument panel. Install the four retaining screws and adjust them to 1.1 Nm (10 in lbs) and then put on the speaker bezel and tighten its screws to 2.2 Nm (20 in lbs). Lastly, reconnect the negative cable from the battery.
Related 2001 Jeep Wrangler Parts
2001 Jeep Wrangler Bumper
2001 Jeep Wrangler Wiper Motor
2001 Jeep Wrangler Cigarette Lighter
2001 Jeep Wrangler Door Check
2001 Jeep Wrangler Door Lock Actuator
2001 Jeep Wrangler Floor Pan
2001 Jeep Wrangler Windshield Washer Nozzle
2001 Jeep Wrangler Shift Indicator
2001 Jeep Wrangler Lift Support
2001 Jeep Wrangler Wheelhouse
2001 Jeep Wrangler Window Crank Handles
2001 Jeep Wrangler Window Run