JeepParts
My Garage
My Account
Cart
OEM 2002 Jeep Wrangler Car Speakers
Audio Speakers- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Car Speakers found
Product Specifications- Other Name: Speaker - Instrument Panel; Speaker, Front; Speaker Instrument Panel
- Position: Front
- Item Weight: 1.90 Pounds
- Item Dimensions: 8.5 x 7.3 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 56038719AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2002 Jeep Wrangler Rear Speaker Part Number: 56038566AC
Product Specifications- Other Name: Speaker; Speaker, Rear; Speaker 5.25"
- Position: Rear
- Item Weight: 2.20 Pounds
- Item Dimensions: 6.4 x 6.6 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56038566AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
- Product Specifications
- Other Name: Speaker - Instrument Panel; Speaker, Front; Speaker Instrument Panel
- Position: Front
- Item Weight: 1.70 Pounds
- Item Dimensions: 9.5 x 5.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 56008795AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2002 Jeep Wrangler Speaker Part Number: 56038609AE
Product Specifications- Other Name: Speaker - Sub Woofer
- Item Weight: 6.50 Pounds
- Item Dimensions: 25.8 x 13.9 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56038609AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2002 Jeep Wrangler Car Speakers Parts and Q&A
- Q: How to Upgrade Car Speakers and Amplified Subwoofers on 2002 Jeep Wrangler?A: Use the manual to disconnect the battery negative cable, next remove the center console and disconnect the wire harness retainer and connector. After that, detach the side-mounting screws, lift the lid to remove the fasteners and get rid of the amplified subwoofer. To install the amplifier, place the subwoofer back into the console, hold it in place by bolting the kit over the top and the screws along the side, plug the wire harness connector back in, place the center console back into position and join the negative wire harness again. When swapping out the speaker, unplug the battery negative cable first and second, unscrew the screws holding the outboard edge of the bezel to the dash. Using a trim stick or similar tool, very gently pry up both the top and bottom edges of the speaker bezel to let the snap clip retainers go and take off the bezel carefully. Afterwards, unscrew the four screws holding the speaker to the armature, lift the speaker out, remove the connector and take the speaker out. To install the speaker, hook the speaker wire connector to it, place the speaker in the instrument panel and use the four small screws to hold it in place tightened to 1.1 Nm (10 in. lbs). Bolt the speaker bezel in place and tighten the screws to 2.2 Nm (20 in. lbs) and then insert and tighten the negative battery terminal.
Related 2002 Jeep Wrangler Parts
2002 Jeep Wrangler Bumper
2002 Jeep Wrangler Wiper Motor
2002 Jeep Wrangler Cigarette Lighter
2002 Jeep Wrangler Door Check
2002 Jeep Wrangler Door Lock Actuator
2002 Jeep Wrangler Floor Pan
2002 Jeep Wrangler Windshield Washer Nozzle
2002 Jeep Wrangler Shift Indicator
2002 Jeep Wrangler Lift Support
2002 Jeep Wrangler Wheelhouse
2002 Jeep Wrangler Window Crank Handles
2002 Jeep Wrangler Window Run